Speaker size
These tests allow you to determine the bass handling capability of large analogue speakers and subwoofers. Once set, the digital surround controller will limit the bass level to protect the speakers from potential damage.
On starting the test the speaker sizes are set to zero to avoid the possibility of damaging the speakers, and the display shows:
Press More for help
Sizes set to zero
ìî | ïñ óòô öõú |
The display then shows the first large analogue speaker; for example:
Press More for help
Left Size 0
ìî | ïñ óòô öõú |
•Press A or V to adjust the size value for the speaker until it just begins to distort distinctly, and then reduce the value by one.
•Press > or < to move between each of the speakers to be adjusted.
This is the last test in the calibration procedure; see To complete the calibration procedure, page 26.
2 9
C a l i b r a t i n g t h e s y s t e m
