i i
P r e f a c e
Important safety instructions
•Read the instructions.
•Keep these instructions.
•Follow all instructions.
•Do not use this apparatus near water.
•Clean only with a dry cloth.
•Install only in accordance with the manufacturer’s instructions.
•Refer all servicing to approved service personnel.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE
This apparatus has been designed with Class 1 construction and must be connected to a mains socket outlet with a protective earthing connection (the third grounding pin).
To avoid overheating
•Leave at least 10cm around the equipment to ensure sufficient ventilation.
Do not position the product:
•In direct sunlight.
•Near heat sources, such as a radiator.
•Directly on top of heat producing equipment, such as a power amplifier.
•On a soft surface, such as a carpet, which would obstruct the ventilation holes in the base.
The product normally runs warm to the touch.
Safety warnings
•Do not expose the product to dripping or splashing.
•Do not place any object filled with liquid, such as a vase, on the product.
•Do not place naked flame sources, such as lighted candles, on the product.
To avoid interference
Do not position the product:
•Near strong magnetic radiation, such as near a power amplifier.
•Near to a television, or where connecting cables may be subject to or cause interference.
Radio interference
FCC Warning: This equipment generates and can radiate radio frequency energy and if not installed and used correctly in accordance with our instructions may cause interference to radio communications or radio and television reception. It has been type- tested and complies with the limits set out in Subpart J, Part 15 of FCC rules for a Class B computing device. These limits are intended to provide reasonable protection against such interference in home installations.
EEC: This product has been designed and
