Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification
128
19.5.1.2 Inquiry Data Format - EVPD = 1 - Page Code = 00h
Table 110:Inquiry Data - EVPD = 1 (Page Code = 00h)
•Qualifier is set to zero to indicate that the LUN specified in the Command Block is currently supported.
•Peripheral Device Type is set to zero to indicate that the device is Direct Access.
•Page Code is set to 0, and this field contains the same value as in the page code field of the INQUIRY command descrip-
tor block.
•Page length specifies the length of the following page data.
•Supported Page Code field contains the Page Codes supported by the Target. The list is in ascending order.
Byte BIT
76543210
0 Qualifier = 0 Peripheral Device Type = 0
1 Page Code = 00h
2 Reserved = 0
3 Page Length = 09h
4 Supported Page Code - 00h
5 Supported Page Code - 03h
6 Supported Page Code - 80h
7 Supported Page Code - 83h
8 Supported Page Code = 86h
9 Supported Page Code = 87h
10 Supported Page Code = 88h
11 Supported Page Code - D1h
12 Supported Page Code - D2h