Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification
136
19.5.1.10 Inquiry Data Format - EVPD = 1, Page Code - D2h
Table 115:Inquiry Data - EVPD = 1 (Page Code = D2h)
Qualifier is set to zero to indicate that the LUN specified in the Command Block is currently supported.
Peripheral Device Type is set to zero to indicate that the device is Direct Access.
Page Code is set to the value of the page code field in the CDB.
Page Length is set to 52, and this field specifies the length of the following page data.
Note: If the media is not available, bytes 0 through 3 are valid. All the other fields are ASCII blanks (20h).
Note: All ASCII fields are alphanumeric, left aligned, and padded on the right with ASCII blanks (20h).
Byte BIT
76543210
0 Qualifier = 0 Peripheral Device Type = 0
1 Page Code = D2h
2 Reserved = 0
3 Page Length = 52 (34h)
4 HDC Version Length = 16 (10h)
5 - 20 ASCII HDC Version
21 Card Serial Number Length = 16 (10h)
22 - 37 ASCII Card Serial Number
38 Card Assembly Part Number Length = 16 (10h)
39 - 54 ASCII Card Assembly Part Number
55 Reserved = 0