Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification
312
The response to certain frames at various stages of login is defined in Table254.
Table 254:Response to Frames before PLOGI or PRLI
Login parameters remain in effect until reset or updated by...
Power cycle
•LIP Reset
Explicit Logout (LOGO)
Explicit Login (PLOGI/PRLI)
Implicit Logout (failure to re-Discover within RR_TOV following LIP)
21.5 Public Loop Operation
The drive is designed to perform as a Public NL_Port described in the FLA 2.70 profile.
The drive will:
tolerate unfairness of a FL_Port
support 24bit addressing
accept FAN extended link service
perform FLOGI to Fabric F_Port (AL_PA = 00h, well known address 0FFFFFEh)
perform registration to a simple name server (AL_PA = 00h, well known address 0FFFFFCh) using RFC-4 service.
claim a fabric-assigned AL_PA during LIP in the LIFA sequence
receive frames from a FL_Port for more than one S_ID in a single loop tenancy
open L_Port at AL_PA = 00h and send frames to remote port
use values of E_D_TOV, R_A_TOV as specified by the fabric in FLOGI ACC
Frame Received No PLOGI PLOGI but no PRLI
ABTS Discard and Send LOGO BA_ACC or BA_RJT(1)
ADISC Discard and Send LOGO ACC(2) or LS_RJT
LOGO ACC ACC
PDISC Discard and Send LOGO ACC(2) or LS_RJT
PLOGI ACC ACC
PRLI Discard and Send LOGO ACC
PRLO Discard and Send LOGO ACC or LS_RJT(3)
Unlisted Extended Link Service Discard and Send LOGO ACC or LS_RJT(4)
Note:
1 - The drive returns BA_RJT to ABTS BLS when ABTS BLS has RX_ID other than 0FFFFh
2 - N_Port ID, Port_Name and Node Name must match a logged in port for ACC to be returned.
3 - If PRLI has not been successfully completed, Reason Code = 'Image Pair does not exist'
4 - Unsupported Extended Link Services are rejected.