Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification
131
19.5.1.4 Inquiry Data Format - EVPD = 1, Page Code - 80h
Table 112:Inquiry Data - EVPD = 1 (Page Code = 80h)
•Qualifier is set to zero to indicate that the LUN specified in the Command Block is currently supported.
•Peripheral Device Type is set to zero to indicate that the device is Direct Access.
•Page Code is set to the value of the page code field in the CDB.
•Page Length is set to 16, and this field specifies the length of the following page data.
•Serial Number gives the drive serial number, right aligned.
Byte BIT
76543210
0 Qualifier = 0 Peripheral Device Type = 0
1 Page Code = 80h
2 Reserved = 0
3 Page Length = 16 (10h)
4-19 Serial Number (ASCII)