Operating, Selecting an input signal | Hitachi PJ-TX100 specs

Operating

Selecting an input signal

1. Using the projector's button, press the INPUT button.

Each time you press the INPUT button, the projector switches between its input ports. Select the signal you wish to project.

Operating

MENU ENTER

INPUT RESET

ENGLISH

COMPONENT VIDEO S-VIDEO VIDEO DVI-D COMPUTER

1. Using the remote control's button, press the button DVI, PC, COMPO, S-VIDEO or VIDEO according to

the input port to choose.

DVI button DVI-D

PC button COMPUTER

COMPO button COMPONENT VIDEO

S-VIDEO button S-VIDEO

VIDEO button VIDEO

POWER		LIGHT
OPT BLK	MODE	MEMORY
ASPECT		IRIS
	ENTER
MENU		RESET	DVI	PC	AUTO
BRIGHT CONTRAST COLOR			DVI	PC	AUTO
DVI	PC		COMPO	S-VIDEO	VIDEO
COMPO	S-VIDEO	VIDEO

Selecting an aspect ratio

1. Press the ASPECT button (remote control) to toggle between the modes for aspect ratio.

The NORMAL mode keeps the original aspect ratio of the signal. At a HDTV signal of 1125i or 750p, only the 16:9 mode can be selected.

At a DVI-D port's input

4:3 16:9 WIDE MOVIE1 MOVIE2 NORMAL

At a computer signal (not DVI-D port's input)

4:3 16:9 NORMAL	POWER	LIGHT
	OPT BLK	MODE MEMORY
	ASPECT	IRIS

At a video signal

4:3 16:9 WIDE MOVIE1 MOVIE2

		OPT BLK	MODE	MEMORY
	ENTER
MENU	RESET	ASPECT		IRIS
		ASPECT		IRIS
BRIGHT CONTRAST COLOR
DVI	PC AUTO

At no signal 4:3 16:9

	At a signal	4:3
	for 4:3	4:3
	for 4:3
	At a signal	4:3
	for 16:9	4:3
	for 16:9

16:9

16:9

WIDE

WIDE

COMPO

S-VIDEO

VIDEO

MOVIE1	MOVIE2
MOVIE1	MOVIE2

13

Image 13

Hitachi PJ-TX100 user manual Operating, Selecting an input signal, Selecting an aspect ratio

Contents

Thank you for purchasing this projector About this manualTrademark acknowledgment Contents About contents of package Fastening the lens cover Projector Part names Mode button Remote control Arrangement Setting upAt 169 screen size At 43 screen size Adjusting the projectors elevator Using the lens shift dials About Plug-and-Play capability Connecting your devices RS-232C DVI out Remote control Connecting power supplyPutting batteries Using the remote control Using the Light buttonLight Turning on the power Power on/offTurning off the power Operating Selecting an input signalSelecting an aspect ratio Using the automatic adjustment feature Adjusting the zoom and focusImproving the contrast ratio Adjusting a black image Selecting a mode of picture type Recalling your adjustment Adjusting the picture brightness, contrast, color Using the menu function Multifunctional settingsMenu Easy Menu Easy Menu Gamma Picture MenuCustom Color Temp Sharpness Picture MenuProgressive MY Memory Custom Gamma adjustment Image Menu PhaseOver Scan Position Image Menu Auto Adjust Color Space Input MenuComponent Video Format Information Input Menu Normal Whisper Setup MenuIris Normal Hinvert Vinvert H&VINVERT Menu Position Screen MenuOSD Bright Start UP Screen Menu How to register your picture as the MyScreenMessage Auto OFF Option MenuLamp Time Factory Reset ServiceOption Menu Fanspeed Lamp Warning High Voltage Maintenance Lamp Case of replacement by yourself To replace the air ﬁlter Air ﬁlterNJ09452 Inside of the projector Caring for the cabinet and remote controlCaring for the lens Related messages Troubleshooting Signal is outside of the response parameters of this unit Internal portion temperature is risingRelated messages Horizontal or vertical wavelength of the inputted Regarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedSignal cables are not correctly connected These has not been properly ﬁxed Phenomena that may easily be mistaken for machine defects RGB input ports Control port SpeciﬁcationControl DVI-D Video input portsPage Contents of package Arrangement Adjusting the projectors elevator Connecting your devices Putting batteries into the remote control Connecting the power supply STANDBY/ON PowerVideo Lamp Lamp replacement Air ﬁlter