Hitachi PJ-TX100 user manual PICTURE Menu, CUSTOM mode, +0 +0 +0 +0, Gain

Multifunctional settings

PICTURE Menu

With the PICTURE menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

MENU [RGB]		:SELECT
PICTURE	BRIGHT	+0
IMAGE	CONTRAST	+0
INPUT	GAMMA	DEFAULT 1
SETUP	COLOR TEMP	6500K
SCREEN	COLOR	+0
OPTION	TINT	+0
EASY MENU	SHARPNESS	+0
	PROGRESSIVE	TURN OFF
	MY MEMORY	SAVE 1

ENGLISH

Item	Description
BRIGHT	Adjust the brightness using the ▲/▼ buttons. :	Light ￿ Dark
CONTRAST	Adjust the contrast using the ▲/▼ buttons. :	Strong ￿ Weak
	Select a GAMMA mode using the ▲/▼ button. :
	#1 DEFAULT ￿ #1 CUSTOM ￿ #2 DEFAULT ￿ #2 CUSTOM

#4 CUSTOM ￿ #4 DEFAULT ￿ #3 CUSTOM ￿ #3 DEFAULT The radio button of the selected will indicate.

	CUSTOM mode
GAMMA	Selecting the CUSTOM and then pressing					ENTER :
	the ► (or the ENTER) button calls the	1	2	3	4	5	6	7	8
	dialog shown in right. Choose an item using
	the ◄/► buttons, and adjust the level using
	the ▲/▼ buttons. :
	memo When you press the ENTER button,	+0 +0 +0 +0				+0 +0 +0			+0
			GAMMA [CUSTOM 1]
	the test pattern for checking appears on the
	screen. (￿21)
	Select a color temperature using the ▲/▼ buttons. :
	9300K ￿ 8500K ￿ 8000K ￿ 7500K ￿ 6500K ￿ DYNAMIC ￿
	CUSTOM
	Selecting CUSTOM and pressing the ►					ENTER :
			OFFSET				GAIN
	button make the adjustment enabled.
			R	G	B		R	G B
COLOR TEMP
	CUSTOM mode

	Select a color item of OFFSET or GAIN
	using the ◄/► buttons, and adjust the level	+0 +0 +0		+0 +0 +0
			COLOR TEMP
	using the ▲/▼ buttons. :
	memo When you press the ENTER button, the test pattern for
	checking appears on the screen. (￿21)
	Adjust the whole color using the ▲/▼ buttons. :
COLOR	Strong ￿ Weak
	memo This item can be selected only at a video signal.
	memo This function doesn’t work with some input signal formats.
	Adjust the tint using the ▲/▼ buttons. :
TINT	Green ￿ Red
	memo This item can be selected only at a video signal.

19