Hitachi PJ-TX100 user manual IMAGE Menu, Auto Adjust

Multifunctional settings

IMAGE Menu

With the IMAGE menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

MENU [RGB]		:SELECT
PICTURE	ASPECT	4:3
IMAGE	OVER SCAN	95
INPUT	V POSITION	25
SETUP	H POSITION	142
SCREEN	H PHASE	16
OPTION	H SIZE	1344
EASY MENU	AUTO ADJUST

Item	Description
	Select an Aspect Ratio using the ▲/▼ buttons:
	At a COMPUTER input:
	4:3 ￿ 16:9 ￿ NORMAL
	• The NORMAL keeps the original aspect ratio of the input signal.
	• At a COMPUTER input, selecting an aspect ratio may display the
	message“SYNC IS OUT OF RANGE”. In this case, please select
	one of other aspect ratios.
ASPECT	At a DVI-D input:
	4:3 ￿ 16:9 ￿ WIDE ￿ MOVIE1 ￿ MOVIE2 ￿ NORMAL
	At a VIDEO input, a S-VIDEO input or a COMPONENT VIDEO
	input:
	4:3 ￿ 16:9 ￿ WIDE ￿ MOVIE-1 ￿ MOVIE-2
	• At a COMPONENT VIDEO input of 16:9 HD signal of 1125i(1080i)/
	750p(720p), only 16:9 can be selected.
	At no input.:
	4:3 ￿ 16:9
	Adjust the over-scan ratio using the ▲/▼ buttons. :
	Small ￿ Large
OVER SCAN	memo This item can be selected only at a video signal.
	memo When this adjustment is too large, certain degradation may
	appear at the frame area of the picture. In such a case, please
	adjust small.
	Adjust the vertical position using the ▲/▼ buttons. :
V POSITION	Up ￿ Down
	memo This item cannot be selected only at a DVI-D signal.
	Adjust the horizontal position using the / buttons. :
H POSITION	Left ￿ Right
	memo This item cannot be selected only at a DVI-D signal.
	Adjust the horizontal phase to eliminate fl icker using the ▲/▼
	buttons. :
H PHASE	Right ￿ Left
	memo This item can be selected only at a RGB signal or a
	component video signal.

22