English
One of the most severe dangers when working with a chain saw is the possibility of kickback. Kickback may occur when the upper tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back toward you. Pinching the saw chain along the top of the guide bar may also push the guide bar rapidly back towards you. Either of these reactions may cause you to lose control of the saw which could result in serious personal injury. Even though your saw has safety built into its design, you should not rely on these safety features exclusively. Know where your bar tip is at all times. Kickback does occur if you allow the kickback zone (1) of the bar to touch an object. Do not use that area. Kickback from pinching is caused by a cut closing and pinching the upper side of the guide bar. Study your cut and make sure it will open as you cut through. Maintain control when the engine is running by always keeping a firm grip on the saw with your right hand on the rear handle, your left hand on the front handle and your thumbs and fingers encircling the handles. Always hold the saw with both hands during operation and cut at high engine speed.
WARNING
KICKBACK DANGER (Fig. 1)
1
Fig. 1
SPECIFICATIONS
○Code “CS” of model name means “Chain saw”
| Model | CS33EDT (30) | CS33EDT (35) | CS33EDTP (35) |
| Type of equipment | | Chain saw, portable | |
| Engine Size (cu. in.) | | 1.96 (32.2 ml) | |
| Spark Plug | | NGK BPMR-7A | |
| Fuel Tank Capacity (fl.oz) | | 9.9 (290 ml) | |
| Chain Oil Tank Capacity (fl.oz) | | 6.1 (180 ml) | |
| Dry Weight (lbs) | | 7.5 (3.4 kg) | |
| (Without guide bar and chain) | | |
| | | |
| Chain pitch (in.) | | 3/8 (9.53 mm) | |
| Chain gauge (in.) | | 0.05 (1.27 mm) | |
| Sound pressure level LpA (dB (A)) by ISO 22868 | | 100 | |
| Equivalent | | |
| Uncertainty | | 3 | |
| Sound power level LwA (dB (A)) by ISO 22868 | | 109 | |
| Measured | | |
| Uncertainty | | 3 | |
| Sound power level LwA (dB (A)) by 2000/14/EC | | 113 | |
| Measured | | |
| Guaranteed | | 116 | |
| Vibration level (m/s2) by ISO 22867 | | 4.4 | |
| Front handle | | |
| Rear handle | | 6.1 | |
| Uncertainty | | 0.8 | |
| Guide bar length (in.) | 12 (300 mm) | 14 (350 mm) | 14 (350 mm) |
| Type of chain | 91VG045 | 91VG052 | 91VG052 |
| (Oregon) | (Oregon) | (Oregon) |
| |
| Max. engine power | 1.3/9300 | 1.3/9300 | 1.2/9300 |
| by ISO 7293 (kW) |
| Max. engine speed (min-1) | | 12000 | |
| Idle engine speed (min-1) | | 3000 | |
| Specific fuel consumption (g/kWh) | 567 | 567 | 534 |
| Max. chain speed (m/sec) | | 22.9 | |
| Sprocket (number of teeth) | | 6 | |
NOTE: Equivalent noise level/vibration levels by ISO 22868/22867 are calculated as the time-weighted energy total for noise/vibration levels under various working conditions with the following time distribution: 1/3 idle, 1/3 full, 1/3 racing speed.
* All data subject to change without notice.
5
