English

MAINTENANCE

NOTE:

The information contained in this Manual is designed to assist you in the safe maintenance of the Stapler.

Some illustrations in this Manual may show details or attachments that differ from those on your own Stapler.

MAINTENANCE AND

INSPECTION

Read section titled “SAFETY” (pages 5 – 8).

WARNING

￿Disconnect air hose and remove all staples from Stapler when:

1)doing maintenance and inspection; and

2)clearing a jam.

1.Clearing a jam

Remove a jammed staple in the following order:

1 DISCONNECT AIR HOSE.

2 Remove all staples.

3 Release the lock lever and open the blade guide.

4 Remove the jammed staple with a slotted-head screwdriver.

5 Close the blade guide and latch.

6 In case of frequent jam, contact a Hitachi authorized service center.

Lock lever

Blade guide

3

1 Disconnect

 

 

air hose

4

2. Storing

￿When not in use for an extended period, apply a thin coat of the lubricant to the steel parts to avoid rust.

￿Do not store the Stapler in a cold weather environment.

Keep the Stapler in a warm area.

￿When not in use, the Stapler should be stored in a warm and dry place.

Keep out of reach of children.

3.WARNING LABEL

Change the WARNING LABEL if missing or damaged.

A new WARNING LABEL is available from a Hitachi authorized service center.

Warning label

4.Maintenance chart (Page 20)

5.Operator troubleshooting (Page 20 – 21)

— 18 —