![](/images/backgrounds/279179/279179-6417x1.png)
English
2)the Stapler is always held firmly against the workpiece.
If staples are driven too deep or shallow into the workpiece, adjust the stapling in the following order.
1DISCONNECT AIR HOSE FROM STAPLER.
15
Disconnect air hose
Adjuster
2If staples are driven too deep, turn the adjuster to the shallow side.
If staples are driven too shallow, turn the adjuster to the deep side.
2 | Turn adjuster | Flush | |
Too deep | |||
|
2
Too shallow Turn adjuster | Flush |
3Stop turning the adjuster when a suitable
position is reached for a stapling test.
4Connect the air hose.
ALWAYS WEAR SAFETY GLASSES.
Perform a stapling test.
5DISCONNECT AIR HOSE FROM
STAPLER.
6Choose a suitable position for the adjuster.
— 17 —