English

 

 

 

 

 

 

 

 

 

 

 

SAFETY — Continued

 

 

 

 

 

 

 

 

 

 

 

 

WARNING

 

 

 

 

17. KEEP FACE, HANDS AND FEET AWAY

23. NEVER CARRY STAPLER BY HOSE.

FROM FIRING HEAD AT ALL TIMES.

 

24. DO NOT OVERREACH.

 

 

 

Never place your face, hands or feet near

 

 

 

Keep proper footing and balance at all

the firing head.

 

 

times.

 

 

 

 

18. PLACE

STAPLER PROPERLY

ON

 

 

 

 

25. NEVER USE

STAPLER WHICH IS

WORKPIECE.

 

 

DEFECTIVE

OR

 

OPERATING

Do not drive fasteners on top of other

 

ABNORMALLY.

 

 

 

fasteners or with the Stapler at too steep

 

 

 

If the Stapler appears to be operating

of an angle; the fasteners can ricochet

unusually, making strange noises, or

and hurt someone.

 

 

otherwise appears defective, stop using

 

 

 

19. BE CAREFUL OF DOUBLE FIRE DUE TO

it immediately and arrange for repairs by

RECOIL.

 

 

a Hitachi authorized service center.

If the push lever is unintentionally

26. DO NOT DISCONNECT AIR HOSE FROM

allowed to re-contact the workpiece

STAPLER WITH FINGER ON TRIGGER.

following recoil, an unwanted fastener

The Stapler can fire when re-connected

will be driven.

 

 

to an air supply.

 

 

 

In order to avoid this undesirable double

 

 

 

 

 

 

 

 

fire,

 

 

27. DISCONNECT AIR HOSE FROM STAPLER

1)do not push the Stapler on the

WHEN:

 

 

 

 

workpiece with strong force;

 

1) doing maintenance and inspection;

2) take the Stapler completely away from

2) loading fasteners;

 

 

 

the workpiece using recoil, and keep

3) clearing a jam;

 

 

 

the push lever away from the

4) it is not in use;

 

 

 

workpiece until the next desirable

5) leaving work area;

 

 

 

shot; and

 

6) moving it to another location; and

3) pull the trigger and release it QUICKLY

7) handing it to another person.

when

performing intermittent

Never attempt to clear a jam or repair the

operation (trigger fire).

 

Stapler unless you have disconnected air

20. DO NOT DRIVE FASTENERS INTO THIN

hose from the Stapler and removed all

remaining fasteners from the Stapler.

BOARDS OR NEAR CORNERS AND

The Stapler

should

never be left

EDGES OF WORKPIECE.

 

 

unattended since people who are not

The fasteners can be driven through or

familiar with the Stapler might handle it

away from the workpiece and

hit

and injure the themselves.

someone.

 

 

 

 

 

 

 

21. NEVER DRIVE FASTENERS FROM BOTH

28. STAY ALERT.

 

 

 

 

Watch what you are doing. Use common

SIDES OF A WALL AT THE SAME TIME.

sense.

 

 

 

 

The fasteners can be driven into and

 

 

 

 

Do not operate the Stapler when you are

through the wall and hit a person on the

tired.

 

 

 

 

opposite side.

 

 

 

 

 

 

The Stapler should never be used by you

 

 

 

22. CHECK FOR LIVE WIRES.

 

if you are under the influence of alcohol,

Avoid the risk of severe electrical shock

drugs or medication that makes you

by checking for live electrical wires that

drowsy.

 

 

 

 

may be hidden by walls, floors or ceilings.

 

 

 

 

 

Turn off the breaker switch to ensure

there are no live wires.

— 7 —