Hobart FP400 manual TROUBLESHOOTING Contd, Symptom, Possible Cause, Suggested Action

Models: FP400

1 16

Page 16

SYMPTOM	POSSIBLE CAUSE	SUGGESTED ACTION

Cutting tool locked to shaft.	Build-up between cutting tool and	Always use the ejector plate. Use
	dicing grid or potato chip grid.	a thick leather glove and carefully
		rotate cutting tool clockwise.

Decoring screw or agitator device	Devices have tightened during use	Use the wrench provided to
cannot be removed.	of the machine.	unscrew devices (left-hand thread).

FORM 33966 Rev. A (11-98)

– 16 –

PRINTED IN U.S.A.

Image 16

Contents

N S TRUCT I ONS MODEL FP400 FOOD PROCESSORML-104751 FORM 33966 Rev. ATABLE OF CONTENTS MODEL FP400 FOOD PROCESSOR Shown with Feed Hopper Attachment HOBART CORPORATIONInstallation, Operation and Care of HOBART MODEL FP400 FOOD PROCESSOR INSTALLATIONPLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL UNPACKINGSTART-UP TESTING VERIFY CORRECT ROTATIONLOCKING KNOB LOCKING HANDLE PUSHER PLATE FEED CYLINDER OPENINGOPERATION CONTROLS FigSlicing, Shredding, Grating, and Julienne Cutting INSTALLING THE CUTTING TOOLSDicing and French Fries INSTALLING AND REMOVING THE FEED CYLINDER Fig REMOVING THE CUTTING TOOLSFEED CYLINDER HINGE PINS LOCKING HANDLEFeed Hopper INSTALLING AND REMOVING THE FEED ATTACHMENTSUse the agitator device to secure the plates to the knife shaft Pusher Plate Use the decoring screw to secure the plates to the knife shaftFEED HOPPER ATTACHMENT LOCKING KNOB FEED CYLINDER TUBEUSING THE FOOD PROCESSOR SlicersWhen used with dicing grid, use only the 3⁄ 4 19 mm dicing gridJulienne Cutters Crimping SlicerGraters and Shredders CLEANING REPLACEMENT DICING GRIDS MAINTENANCESERVICE TROUBLESHOOTING SYMPTOMPOSSIBLE CAUSE SUGGESTED ACTIONTROUBLESHOOTING Contd SYMPTOMPOSSIBLE CAUSE SUGGESTED ACTION