Hobart HFB6 ELECTRICAL CONNECTION - Hard Wired Ovens, Electrical Data, Minimum Circuit Ampacity

ELECTRICAL CONNECTION — (Hard Wired Ovens)

WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.

WARNING: DISCONNECT THE ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE YOU ARE WORKING ON THE CIRCUIT.

A qualified electrician must wire the oven into a properly-rated dedicated circuit.

Measure the incoming power supply with a volt ohmmeter. The supply MUST measure 197 volts with no load as a minimum.

ELECTRICAL CONNECTION — (Cord Connected Ovens)

WARNING: APPLIANCES EQUIPPED WITH A FLEXIBLE ELECTRIC SUPPLY CORD ARE PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THE PLUG MUST BE CONNECTED TO A PROPERLY GROUNDED THREE-PRONG RECEPTACLE. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT REMOVE THE GROUNDING PRONG FROM THE PLUG.

Plug the oven into a dedicated circuit outlet of the appropriate NEMA style and rating. The plug and cord supplied is suitable for 208 or 240 volt operation.

Measure the incoming power supply with a volt ohmmeter. The supply MUST measure 197 volts with no load as a minimum.

ELECTRICAL DATA

		Minimum Circuit Ampacity
Model	Volts / Hertz / Phase	Maximum Protective Device	Receptacle		Plug
		AMPS
				G
HFB6	208 – 240 / 60 / 1	30			6--30P
Cord Equipped
			6--30R
HFB6	208 – 240 / 60 / 1	30
Hard Wire Installation

Compiled in accordance with the National Electrical Code, NFPA 70, latest edition.

– 5 –