Installation, Operation, and Care of
MODEL HFB6
ELECTRIC OVEN
SAVE THESE INSTRUCTIONS
GENERAL
Your Hobart FlashBake oven is a versatile oven that employs a revolutionary high quality,
FlashBake ovens use visible and infrared light energy to cook by radiative heat transfer. The infrared energy browns the surface of the food, while the visible light energy penetrates and heats it internally. Using the proper combination of visible and infrared light energy, the FlashBake oven provides efficient,
The HFB6 FlashBake oven may be ordered with a 6 foot (1829 mm) power cord for receptacle installation, or with a junction box for direct line connection.
INSTALLATION
Before installing, verify that the electrical service agrees with the specifications on the rating plate located on the rear of the oven. If the supply and specifications do not agree, do not proceed with the installation. Contact your dealer or your local
UNPACKING
Immediately after unpacking, check for possible shipping damage. If the oven is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
Check to make sure you have the following items:
1. | Oven (1) | 5. | Cooking guide (1) |
2. | 16" (406.5 mm) stainless steel grill (1) | 6. | Lamp shield scraper (1) |
3. | Upper lamp shield (1) | 7. | Menu cards (3) |
4. | Instructions Manual (1) |
|
|
LOCATION
When deciding oven placement, be sure to consider clearance and available air for oven cooling. If the inlet air is obstructed or heated, the oven will not operate properly.
Install the oven on a level countertop.
There must be a 3" (76 mm) minimum clearance on each side of the oven. The area behind the oven around the blower must be kept clear of obstructions and allow free air circulation.
Make sure the cord can be plugged into the appropriate outlet.
– 3 –