Problem | Probable Cause | Remedy |
|
|
|
Welding arc not stable. | Wire slipping in drive rolls. | Adjust pressure setting on wire feed rolls. Replace worn |
|
| drive rolls if necessary. |
|
|
|
| Wrong size gun liner or contact tip. | Match liner and contact tip to wire size and type. |
|
|
|
| Incorrect voltage setting for selected wire feed speed on | Readjust welding parameters. |
| welding power source. |
|
|
|
|
| Loose connections at the gun weld cable or work cable. | Check and tighten all connections. |
|
|
|
| Gun in poor shape or loose connection inside gun. | Repair or replace gun as necessary. |
|
|
|
Page 43
Image 43
