4-17. Adjusting Trigger Hold Actuation Time
To adjust trigger hold actuation time, proceed as follows:
1 Motor Speed Control Board PC1
2 Potentiometer R50
. Trigger hold actuation time
range is from 0 to 4 seconds.
To decrease trigger hold actuation time, use a small nonconductive
screwdriver and rotate potentiometer clockwise; to increase actuation time, rotate potentiometer counterclockwise.
Reinstall side panel.
1
Top Of PC1
2
Tools Needed:
Nonconductive
1/4 in
Ref. 801 557 / 197 716
