4-3. Air-Cooled Gun Connections
2
7
6
8
3 | 4 | 5 |
|
Left Side
6
1
1
6
1 Gun Control Cable
Insert plug into Gun Control receptacle, and tighten threaded collar.
2Gas Hose
3Reed Relay
4Weld Cable
5Weld Cable Terminal In Feeder
Route weld cable from welding power source through reed relay to weld cable terminal in feeder and connect to weld cable terminal.
6Gun Connector
7Gun Securing Knob
8Gun Connector Block
Loosen gun securing knob, and insert gun connector through Wire opening until it bottoms against block. Tighten knob. Close and latch door.
Tools Needed:
9/16, 3/4 in
Ref. 801
