.A complete Parts List is available at www.HobartWelders.com
5-4. Sequence Of Cutting Operation
| Y The pilot arc starts immediately |
| when trigger is pressed. |
| . Moisture from the compressor will form in the air line |
EXAMPLE Of Cutting Operation | and at the torch. It will be normal to sometimes see |
| moisture come out the end of the torch. |
Place tip near work. | Press trigger. | After cutting arc |
. Keep tip 1/16 in. from | Pilot arc starts. | |
| starts, slowly | |
work for max cutting |
| move torch |
speed and tip life. |
| across metal. |
Adjust speed so |
| Torch air cooling (postflow) | |
Pause briefly at | continues after releasing trigger. | ||
sparks go thru metal |
| ||
end of cut before | . Postflow must finish before | ||
and out bottom of cut. | |||
| releasing trigger. | trigger will restart pilot arc. | |
|
|
804
