7. CAT CABIN

(FRONT TRAMPOLINE MUST BE LOOSE) POSITION BOX OVER FRONT CROSSBAR. EASE DOWN OVER CROSSBAR. STUDS IN THE BOTTOM OF CAT CABIN PASS THRU THE TRAMPOLINE SLOTS. REMOVE TWO BLACK PLATES, FOUR BLACK LOCK KNOBS AND LOCK WASHERS FROM RIG KIT. PLATES INSTALL SO THAT THE CABIN IS REMOVABLE FROM BELOW THE BOAT BY HAND.

FIGURE 7

8. WINGS

8.1Identify the left and right wing assemblies. Red Dot = LEFT

Green Dot = RIGHT

8.2Mark the legs with tape as shown. These points indicate full and complete insertion of the legs into the hull. (FIGURE 8)

8.3Put the right wing legs into the sockets and place the right seat onto the legs. All parts are pre-drilled so the holes should line up properly. Rivet the seat onto the legs using rivets and rivet caps. (FIGURE 9)

FIGURE 8

FIGURE 9

6

Page 8
Image 8
Hobie 21 manual CAT Cabin, Wings