cabin to accept the sticky back more permantly.
To waterproof the tent... a tent seam spray must be used and the luff grove of the mast must be blocked with a dab of silicone.
27. CRUISER MOTOR MOUNT INSTRUCTIONS (option)
CRUISER MOTOR MOUNT INSTRUCTIONS
1.CLAMP MOTOR MOUNT ON C.L. OF REAR CROSSBAR AS SHOWN BELOW.
2.USING HOLES IN MOTOR MOUNT CASTINGS AS A DRILL GUIDE, DRILL HOLES IN CROSSBAR WITH A #11 DRILL BIT AND SECURE IN PLACE WITH RIVETS SUPPLIED.
ONCE CLAMPED IN POSITION, DRILL AND RIVET TO SECURE THEN RELEASE THE CLAMP KICK UP BLOCK IN DOWN POSITION
CLAMP IN POSITION WITH THE SHAFT IN THE DOWN POSITION AND PARALLEL TO THE WATER LINE
FIGURE 47
FIGURE 48
22
