![](/images/new-backgrounds/1328855/3288559x1.webp)
2. INSTALLING CROSS BAR BOLTS Applies to both front and rear cross bars
APPLY ANTI SEIZE PRIOR TO INSTALLING (PREVENTS THREAD DAMAGE)
FIGURE 3
(4” BOLTS INSTALL IN REAR BAR)
3/8” X 3/4” WASHERS FROM RIG KIT
FRONT BAR -
STDB OUTBOARD
APPLY RTV SEALANT AROUND HOLES PRIOR TO INSTALLATION
STBD HULL - OUTBOARD
If BOLTS FEEL LIKE YOUR FORCING THEM TO THREAD, BACK THEM OUT AND CHASE TAPPED HOLES WITH A 3/8"
FORCING THREADING WILL DAMAGE THE
BOLT AND TAPPED HOLE THREADS.
3