3.LACING YOUR TRAMPOLINE
3.1Before lacing, slide the tramp into the tracks in both of the hulls. Be sure to slide back as far aft as possible. Using soapy water helps with the installation of the tramp.
3.2Place tramp lace bar in tramp as shown below. (FIGURE 4)
FIGURE 4
INSERT ROD IN AFT LOOP OF THE TRAMP AS SHOWN
3.3 Follow the rear
NOTE: Tighten tramp to individual preference. Do not use any tramp tightening device. This may cause damage to the tramp.
LINE STARTS AT GROMMET
IN TRAMP W/ A BOWLINE
KNOT.
FIGURE 5
4
