MAINTENANCE

Use the following instructions to tighten the mount- ing screw of the nose guard. These are specially hardened screws. If you cannot install the screw tightly, replace both the screw and the SAFE-T-TIP®before further operation.

NOTE:  Do not replace the screw with an ordinary screw. Use only identical replacement parts from the manufacturer when replacing parts.

In addition to preventing chain contact with solid objects at the nose of the bar, the SAFE-T-TIP®also helps keep the chain away from abrasive surfaces, such as the ground. Keep it on the right hand side of the bar where it will be between the chain and the ground during flush with ground cutting.

The mounting screw requires a 5/16 in. wrench (or adjustable wrench) to achieve the recommended torque of 35 to 45 in.lb. A torque within this range can be achieved by using the following method.

nTighten the screw with wrench until snug.

nFrom the snug position, tighten the screw an additional 3/4 of a turn using a wrench.

CLEANING THE AIR FILTER

See Figures 61 - 62.

nActivate the chain brake.

nRemove the two screws holding the cylinder cover.

nLift the front of the cylinder cover past chain brake lever.

nLift the back of the cylinder cover past the handle.

nBefore removing the air filter from the carbure- tor, blow or brush as much loose dirt and saw- dust from around the carburetor and chamber as possible.

NOTE:  Make sure to pull the choke rod out to keep the carburetor from being contaminated.

nLift the air filter off the air filter base.

Choose one of the following cleaning options:

nTo lightly clean, tap the filter against a smooth, flat surface to dislodge most saw dust and dirt particles.

SCREWS

CYLINDER

COVER

Fig. 61

AIR FILTER

Fig. 62

nAfter every 5 hours of operation, clean in warm soapy water, rinse, and let dry completely. Replace with a new filter after every 25 hours of use.

NOTE:  An alternate method is to clean the filter with compressed air. Always wear eye protec- tion to avoid eye injury.

nReinstall the air filter.

NOTE:  If you use an air hose for drying, blow through both side of filter.

CAUTION:

Make sure the air filter is correctly replaced before reassembly. Never run the engine without the air filter, as this may cause serious damage to the chain saw.

Page 33 — English

Page 32 Page 34
Page 33
Image 33
Homelite UT10588, UT10548, UT10568 Cleaning the AIR Filter, See Figures 61, Choose one of the following cleaning options
Page 32 Page 34

UT10568, UT10548, UT10588 specifications

The Homelite UT10588, UT10548, and UT10568 models are a trio of robust and reliable outdoor power equipment designed for homeowners and landscaping professionals alike. Each model caters to various needs, ensuring efficiency and ease of use during yard maintenance tasks.

The Homelite UT10588 is a versatile gas-powered string trimmer that features a lightweight design and a powerful 25cc engine. This model is equipped with a dual-line auto-feed spool that ensures smooth and continuous trimming. The adjustable handle allows users to customize the grip for added comfort during prolonged use while reducing fatigue. An important feature is its 2-cycle engine, which provides efficient performance and fuel economy. Additionally, the UT10588's EasyStart technology enables quick engine ignition, making it user-friendly, even for those less experienced in using gas-powered tools.

On the other hand, the Homelite UT10548 is designed as a powerful yet compact option for tackling tough vegetation. It employs a 30cc engine, delivering enhanced cutting power without compromising user comfort. The UT10548 comes with a 17-inch cutting path, allowing for efficient trimming of larger areas in less time. The model features a curved shaft design making it easier to handle and navigate around flower beds, fences, and other obstacles. Its innovative string head utilizes a simple tap-to-feed mechanism, ensuring that users always have the desired cutting length without needing to stop and adjust the trimmer.

Lastly, the Homelite UT10568 serves as an excellent choice for users needing a high-performance weed eater. This model is powered by a robust 40cc engine, ideal for heavy-duty applications. Its straight shaft design increases reach and accessibility, making it perfect for trimming hard-to-reach areas. One of the standout features is its robust cutting system, which utilizes an advanced three-blade design, providing exceptional cutting efficiency for tougher weeds and grass. The UT10568 also comes with an easy-to-use, bump-feed line, facilitating quick line replacements during operation.

All three models prioritize user comfort and efficiency, making them essential tools for maintaining a beautiful outdoor space. Whether trimming grass, edging sidewalks, or tackling overgrown weeds, the Homelite UT10588, UT10548, and UT10568 all exhibit the durability and performance necessary to get the job done effectively. With their unique technologies and features, these trimmers stand out in the market, offering reliability, power, and convenience to users of all experience levels.
Top Page Image Contents