Glossary of Terms

Bucking

The process of cross cutting a felled tree or log into lengths.

Chain Brake

A device used to stop the saw chain.

Chain Saw Powerhead

A chain saw without the saw chain and guide bar.

Clutch

A mechanism for connecting and disconnecting a driven member to and from a rotating source of power.

Drive Sprocket or Sprocket

The toothed part that drives the saw chain.

Felling

The process of cutting down a tree.

Felling Back Cut

The final cut in a tree felling operation made on the opposite side of the tree from the notching undercut.

Front Hand Guard

A structural barrier between the front handle of a chain saw and the guide bar, typically located close to the hand position on the front handle, and sometimes employed as an activating lever for a chain brake.

Front Handle

The support handle located at or toward the front of the chain saw. This handle is for the left hand.

Guide Bar

A solid railed structure that supports and guides the saw chain.

Kickback

The backward or upward motion, or both, of the guide bar occurring when the saw chain near the nose of the top area of the guide bar contacts any object such as a log or branch, or when the wood closes in and pinches the saw chain in the cut.

Kickback (Pinch)

Therapidpushbackofthesawwhichcanoccurwhen the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar.

Kickback (Rotational)

The rapid upward and backward motion of the saw which can occur when the moving saw chain near the upper portion of the tip of the guide bar contacts an object, such as a log or branch.

Low-Kickback Chain

A chain that complies with the kickback perfor- mance requirements of ANSI B175.1 when tested on a representative sample of chain saws.

Normal Cutting Position

Those positions assumed in performing the bucking and felling cuts.

Notching Undercut

A notch cut in a tree that directs the tree’s fall.

Rear Handle

The support handle located at or toward the rear of the saw. It normally contains the throttle. This handle is for the right hand.

Reduced Kickback Guide Bar

A guide bar which has been demonstrated to reduce kickback significantly.

Replacement Saw Chain

A chain that complies with the kickback perfor- mance requirements of ANSI B175.1 when tested with specific chain saws. It may not meet the ANSI performance requirements when used with other saws.

SAFE-T-TIP®Nose Guard

An attachment that may be provided on the end of the guide bar to prevent the chain at the end of the guide bar from contacting the wood.

Saw Chain

A loop of chain having cutting teeth that cut the wood, and that is driven by the motor and is sup- ported by the guide bar.

Springpole

A small tree (sapling) or limb that is bent or trapped under tension. It may “spring back” rapidly when cut, causing a dangerous situation.

Page 8 — English

UT10568, UT10548, UT10588 specifications

The Homelite UT10588, UT10548, and UT10568 models are a trio of robust and reliable outdoor power equipment designed for homeowners and landscaping professionals alike. Each model caters to various needs, ensuring efficiency and ease of use during yard maintenance tasks.

The Homelite UT10588 is a versatile gas-powered string trimmer that features a lightweight design and a powerful 25cc engine. This model is equipped with a dual-line auto-feed spool that ensures smooth and continuous trimming. The adjustable handle allows users to customize the grip for added comfort during prolonged use while reducing fatigue. An important feature is its 2-cycle engine, which provides efficient performance and fuel economy. Additionally, the UT10588's EasyStart technology enables quick engine ignition, making it user-friendly, even for those less experienced in using gas-powered tools.

On the other hand, the Homelite UT10548 is designed as a powerful yet compact option for tackling tough vegetation. It employs a 30cc engine, delivering enhanced cutting power without compromising user comfort. The UT10548 comes with a 17-inch cutting path, allowing for efficient trimming of larger areas in less time. The model features a curved shaft design making it easier to handle and navigate around flower beds, fences, and other obstacles. Its innovative string head utilizes a simple tap-to-feed mechanism, ensuring that users always have the desired cutting length without needing to stop and adjust the trimmer.

Lastly, the Homelite UT10568 serves as an excellent choice for users needing a high-performance weed eater. This model is powered by a robust 40cc engine, ideal for heavy-duty applications. Its straight shaft design increases reach and accessibility, making it perfect for trimming hard-to-reach areas. One of the standout features is its robust cutting system, which utilizes an advanced three-blade design, providing exceptional cutting efficiency for tougher weeds and grass. The UT10568 also comes with an easy-to-use, bump-feed line, facilitating quick line replacements during operation.

All three models prioritize user comfort and efficiency, making them essential tools for maintaining a beautiful outdoor space. Whether trimming grass, edging sidewalks, or tackling overgrown weeds, the Homelite UT10588, UT10548, and UT10568 all exhibit the durability and performance necessary to get the job done effectively. With their unique technologies and features, these trimmers stand out in the market, offering reliability, power, and convenience to users of all experience levels.

Homelite UT10568, UT10588, UT10548 manuel dutilisation Glossary of Terms

Models: UT10568 UT10548 UT10588