|
| FEATURES |
|
|
|
| |
|
|
|
|
|
|
|
|
PRODUCT SPECIFICATIONS |
|
| |
Fuel Tank Capacity | 0.25 gal. | ||
Maximum Pounds Per Square Inch Pressure* | 2,200 psi | ||
Maximum Gallons Per Minute* | 2.0 gpm | ||
Maximum Inlet Water Temperature | 104˚F | ||
*Max. rating determined by PWMA Standard 101 |
|
| |
KNOW YOUR pressure washer
See Figure 1.
The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
Fuel tank
This fuel tank has a maximum capacity of 0.25 gal. Use unleaded automotive gasoline in the engine.
THERMAL RELief VALVE
This pump feature will prevent water temperatures from reaching harmful levels by releasing a small amount of water. Once the water has drained, the thermal relief valve will reset itself.
trigger handle
The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue. Both the trigger handle and spray wand have storage areas located on the sides of the machine.
HOSE storage
Once the high pressure hose is rolled, hang it on the machine using the
On/off switch
To turn the engine off, press the ON/OFF switch.
recoil starter
The recoil starter is pulled to start the machine.
trigger with lock out
Pulling the trigger releases a stream of water for high pressure cleaning. The lock out provides protection against unauthorized use.
TOOLS NEEDED
The following tools (not included or drawn to scale) are needed for assembly:
See Figure 1a.
n7/16 in. wrench
nPhillips head screwdriver
Page 7 — English
