Honeywell 1280i manual 129

Selection	Setting	Serial Command	Page
	* Indicates default	# Indicates a numeric entry
Aimer Delay	200 milliseconds	SCNDLY200	3-7
	400 milliseconds	SCNDLY400	3-7
	*Off (no delay)	SCNDLY0	3-7
User-Specified Aimer Delay	Range 0 - 4,000 ms	SCNDLY####	3-7
LED Indicators	Red LED Off	LEDFN10	3-8
	Green LED Off	LEDFN20	3-8
	Red LED On with Good Scan	LEDFN11	3-8
	*Green LED On with Good Scan	LEDFN21	3-8
	*Red LED On with Laser	LEDFN12	3-8
	Green LED On with Laser	LEDFN22	3-8
	Red LED On when CodeGate	LEDFN14	3-8
	Disabled
	Green LED On when CodeGate	LEDFN24	3-8
	Disabled
	Red LED On with CTS	LEDFN1128	3-8
	Green LED On with CTS	LEDFN2128	3-8
Good Read Delay	*No Delay	DLYGRD0	3-9
	Short Delay (500 ms)	DLYGRD500	3-9
	Medium Delay (1000 ms)	DLYGRD1000	3-9
	Long Delay (1500 ms)	DLYGRD1500	3-9
User-Specified Good Read Delay	Range 0 - 30,000 ms	DLYGRD#####	3-9
Out-of-Stand Settings	Out-of-Stand Defaults	AOSDFT	3-9
	Presentation Mode Out-of-Stand	PAPPM3	3-10
	Manual Activation Mode Off Out-	AOSMEN0	3-10
	of-Stand
	*Manual Activation Mode On Out-	AOSMEN1	3-10
	of-Stand
	Do Not End Manual Activation	AOSMGD0	3-10
	After Good Read Out-of-Stand
	*End Manual Activation After Good	AOSMGD1	3-10
	Read Out-of-Stand
	Laser Timeout - Trigger Hold Out-	AOSMPT#####	3-11
	of-Stand
	(Range 1 - 65525) *30,000 ms
	Laser Timeout - Trigger Release	AOSMRT#####	3-11
	Out-of-Stand
	(Range 1 - 65525) *0 ms
Reread Delay	Short (500 ms)	DLYRRD500	3-11
	*Medium (750 ms)	DLYRRD750	3-11
	Long (1000 ms)	DLYRRD1000	3-11
	Extra Long (2000 ms)	DLYRRD2000	3-11
User-Specified Reread Delay	Range 0 - 30,000 ms	DLYRRD#####	3-11
CodeGate	CodeGate Off Out-of-Stand	AOSCGD0.	3-12
	*CodeGate On Out-of-Stand	AOSCGD1.	3-12

8 - 7