Honeywell 1280i ISBT 128 Predefined Concatenation Sequences

Concatenation Timeout

When searching for bar codes during concatenation, you may wish to set a delay used to find the next bar code. Set the length (in milliseconds) for this delay by scanning the following bar code, then setting the timeout (from 1-65535 milliseconds) by scanning digits from the Programming Chart, then scanning Save. Default = 750.

Concatenation Timeout

ISBT 128 Predefined Concatenation Sequences

Note: You must enable Code 128 and ISBT 128 to use this feature.

The following bar codes are used to select the pre-defined ISBT 128 Concatenation Sequence you wish to use. Once you have selected the concatenation sequence, use ISBT 128 Predefined Concatenation Sequences On/Off to enable this fea-

ture. Default = Donation ID Number (001)

and ABO/RhD Blood Groups (002).

*Donation ID Number (001) and ABO/RhD Blood Groups (002)

Donation ID Number (001) and

Donor ID Number (019)

Donation ID Number (001) and

Confidential Unit Exclusion

Status

Product Code (003) and

Expiration Date (Form 1)

Product Code (003) and

Expiration Date (Form 2)

Product Code (003) and

Expiration Date (Form 3)

Product Code (003) and

Expiration Date (Form 4)

6 - 19