Honeywell 1280i Presentation Mode, Manual Activation Mode, End Manual Activation After Good Read, of-Stand, Out-of-Stand, Out-of-Stand, Presentation Mode Out

Presentation Mode

When the scanner is in Presentation Mode, it automatically detects bar codes, then scans and transmits the data. To set the time period before the scanner can read the same bar code a second time use Reread Delay (page 3-11). To return to trigger scanning, scan the Out-of-Stand Defaults bar code, above.

Presentation Mode Out-of-StandManual Activation Mode

In Manual Activation Mode, you must press the trigger to scan a bar code. The scanner scans until a bar code is read, or

until the trigger is released. Default = Manual Activation On Out-of-Stand.

Manual Activation Mode OffOut-of-Stand* Manual Activation Mode On

Out-of-Stand

End Manual Activation After Good Read

After a bar code is successfully read, the laser can be programmed either to remain on and scanning, or to turn off. When End Manual Activation After Good Read is enabled, the laser turns off and stops scanning after a good read. If you scan Do Not End Manual Activation After Good Read, the laser remains on after a good read, but the trigger must be pressed

to scan the next bar code. Default = End Manual Activation After Good Read Out-of-Stand.

Do Not End Manual ActivationAfter Good Read Out-of-Stand* End Manual Activation AfterGood Read Out-of-Stand

3 - 10