Manuals / Brands / Computer Equipment / Scanner / Honeywell / Computer Equipment / Scanner

Honeywell 1280i Reference Charts, A, Linear Symbologies, AIM, Hex, (m), Honeywell, Symbology, Possible modifiers

1 164

Download 164 pages, 1.69 Mb

A

Reference Charts

Symbology Charts

Note: “m” represents the AIM modifier character. Refer to International Technical Specification, Symbology Identifiers, for AIM modifier character details.

Prefix/Suffix entries for specific symbologies override the universal (All Symbologies, 99) entry.

Refer to Data Editing beginning on page 4-1and Data Formatting beginning on page 5-1for information about using Code ID and AIM ID.

Linear Symbologies

		AIM		Honeywell

Symbology	ID	Possible modifiers	ID		Hex
Symbology	ID	(m)	ID		Hex
		(m)


All Symbologies					99

Codabar	]Fm	0-1	a		61

Code 11	]H3		h		68

Code 128	]Cm	0, 1, 2, 4	j		6A

Code 32 Pharmaceutical (PARAF)	]X0		<		3C

Code 39 (supports Full ASCII mode)	]Am	0, 1, 3, 4, 5, 7	b		62

TCIF Linked Code 39 (TLC39)	]L2		T		54

Code 93 and 93i	]Gm	0-9, A-Z,	i		69
		a-m

EAN	]Em	0, 1, 3, 4	d		64

EAN-13 (including Bookland EAN)	]E0		d		64

EAN-13 with Add-On	]E3		d		64

EAN-13 with Extended Coupon Code	]E3		d		64

EAN-8	]E4		D		44

EAN-8 with Add-On	]E3		D		44

GS1

GS1 DataBar	]em	0	y		79

GS1 DataBar Limited	]em		{		7B

GS1 DataBar Expanded	]em		}		7D

GS1-128	]C1		I		49

2 of 5

China Post (Hong Kong 2 of 5)	]X0		Q		51

Interleaved 2 of 5	]Im	0, 1, 3	e		65

Matrix 2 of 5	]X0		m		6D

NEC 2 of 5	]X0		Y		59

Straight 2 of 5 IATA	]Rm	0, 1, 3	f		66

Straight 2 of 5 Industrial	]S0		f		66

MSI	]Mm	0, 1	g		67

Telepen	]Bm		t		74

UPC		0, 1, 2, 3, 8, 9, A, B, C

A - 1

Contents

Page Page FCC Part 15 Subpart B Class B TÜV-RStatement Industry Canada ICES-003 Conformité à la règlementation canadienne C-TickStatement CB Scheme Laser Safety Statement Granit 1280i Scanner Table of Contents Chapter 1 - Getting Started Chapter 2 - Programming the Interface Chapter 3 - Input/Output Settings Page Output Sequence Editor To Add an Output Sequence Sequence Match Beeper Partial Sequence Require Output Sequence Chapter 7 - Utilities Chapter 8 - Serial Programming Commands Menu Command Syntax Menu Commands Chapter 9 - Product Specifications Typical Performance Page Getting Started Set Custom Defaults Save Save Custom Defaults Set Custom Defaults Save Custom Defaults Activate Custom Defaults Activate Custom Defaults Programming the Interface Symbology Prefix Symbology RS232 Baud Rate RS232 Word Length: Data Bits, Stop Bits, and Parity Data Bits Stop Bits Parity RS232 Handshaking RTS/CTS Off: RTS/CTS Off, RTS Inactive: Flow Control, No Timeout: Character-Based RS232 Timeout RS232 Timeout XON/XOFF XON/XOFF On XON/XOFF Off Timeout Retries Timeout Retries Communication Timeout Beeper Off * On RS232 Defaults RS232 Defaults NCR ACK/NAK Block Check Character Transmit NCR Suffix NCR Suffix NCR Prefix/Suffix Transmit * Don’t Transmit Scanner-BiopticPacket Mode Packet Mode On Page Input/Output Settings * Power Up Beeper On Beep on BEL On *Beep on BEL Off Beep on BEL On Beeper – Good Read Beeper - Good Read Off * Beeper - Good Read On Beeper Volume – Good Read Low Beeper Pitch – Good Read Low (1600 Hz) * Medium (3200 Hz) High (4200 Hz) Beeper - Transmit Order Vibrate Duration Beeper Pitch – Error Beeper Duration – Good Read Number of Beeps – Good Read Number of Beeps – Error Beeper Volume Max Laser Aimer - Scanning Pattern Blinking Dot Laser Aimer - Scanning Duration Laser Aimer - Scanning Duration Laser Aimer - Scanning Duration Laser Aimer - Good Read Pattern Laser Aimer - Good Read Laser Aimer - Good Read Duration Laser Aimer - Good Read Duration Laser Aimer - Good Read Duration Aimer Delay 200 milliseconds LED Settings Good Read Delay User-SpecifiedGood Read Delay page Out-of-StandDefaults Defaults Presentation Mode Presentation Mode Out of-Stand Manual Activation Mode Manual Activation Mode Off Manual Activation Laser Timeout - Trigger Settings Laser Timeout - Trigger Hold Laser Timeout - Trigger Release Out-of-Stand Short (500 ms) Activation Character Activation Character End Character Activation After Good Read End Character Activation After Good Read Do Not End Character Activation After Good Read Do Not End Character Activation After Good Read Deactivation Character Deactivation Character Centering On Left Right of Centering Window Blinky Mode On Blinky Always On/Continuous Full Laser Beam Sweep Reduced Laser Beam Sweep Wide Laser Beam Sweep To Add an Output Sequence Enter Sequence 2.Code I.D 3.Length 4.Character Match Sequences Other Programming Selections •Discard Output Sequence Example SEQBLK62001241FF6A001342FF69001243FF Sequence Timeout Sequence Match Beeper Sequence Match Beeper Off * Sequence Match Beeper On Partial Sequence Discard Partial Sequence Transmit Partial Sequence * Discard Partial Sequence Require Output Sequence Page Data Editing Example: Add a Tab Suffix to All Symbologies Step 1. Scan Add Suffix To Clear One or All Prefixes or Suffixes Clear One Prefix (Suffix) Clear All Prefixes (Suffixes) Clear One Suffix Clear All Suffixes * Enable Disable * None Intercharacter Delay User Specified Intercharacter Delay Delay Length Character to Trigger Delay Interfunction Delay Intermessage Delay Intermessage Delay Page Data Formatting Step 5. Length Step 6. Editor Commands Enter Data Format Discard Clear One Data Format Send Commands Send all characters Send a number of characters F2 Example: Send a number of characters F2100D Send all characters up to a particular character F3 Example: Send all characters up to a particular character F3440D 1234567890ABC <CR Insert a string B9 and BA Example: Look for the string “AB” and insert 2 asterisks (**) Command string: B900024142BA00022A2AF10D 1234567890**ABCDEFGHIJ Insert symbology name Insert key strokes Key Modifiers Move Commands Move the cursor forward a number of characters F5 Example: Move the cursor forward and send the data Move the cursor backward a number of characters Move the cursor to the beginning FE and F7 Example: Manipulate bar codes that begin with a FE31F7F2060D Move the cursor to the end Search backward for a character Search forward for a string B0 Example: Send bar code data that starts after a string of characters B00003464748F10D FGHIJ <CR Search backward for a non-matchingcharacter Miscellaneous Commands Suppress characters FB Example: Remove spaces in bar code data FB0120F10D Stop replacing characters Compare characters Compare string Check for a number EC Example: Only output the data if the bar code begins with a number Insert a delay Discard Data On, but Not Required Data Formatter On, Not Required, Keep Prefix/Suffix Data Formatter On, Not Required, Drop Prefix/Suffix Data Format Non-MatchError Tone Data Format Non-Match Error Tone Off Error Single Scan Data Format Change Single Scan-Data Format Single Scan-Primary Page Symbologies <Default All Codabar Settings Codabar Concatenation Codabar Redundancy Codabar Redundancy Codabar Message Length < Default All Code 39 Settings Code 39 Redundancy Code 39 Redundancy Code 39 Redundancy Code 39 Message Length Code 39 Append Full ASCII Full ASCII On * Full ASCII Off Code 39 Code Page Code 39 Code Page < Default All Interleaved 2 of 5 Settings <Default All Matrix 2 of 5 Settings Matrix 2 of 5 Redundancy Matrix 2 of 5 Redundancy Matrix 2 of 5 Message Length < Default All NEC 2 of 5 Settings < Default All Code 93 Settings Code 93 Message Length Code 93 Append Code 93 Code Page Code 93 Code Page <Default All Straight 2 of 5 Industrial Settings <Default All Straight 2 of 5 IATA Settings <Default All Code 11 Settings <Default All Code 128 Settings Code 128 Message Length Code 128 Append ISBT 128 Concatenation ISBT 128 Predefined Concatenation Sequences ISBT 128 Predefined Concatenation Sequences On/Off Allow Predefined Sequence Require Predefined Sequence Allow Predefined Sequence ISBT 128 User-DefinedConcatenation Sequences ISBT 128 User-DefinedConcatenation Sequences On/Off Allow User-Defined Sequence Require Content Verification Transmit Identifiers Flag Digit Conversion <Default All GS1-128Settings <Default All Telepen Settings <Default All UPC-ASettings UPC-ACheck Digit UPC-ANumber System UPC-AAddenda UPC-AAddenda Required UPC-AAddenda Separator UPC-ARedundancy and Allow Concatenation UPC-A/Code128 Coupon Code Output Multiple Code Output Single Code Output * Multiple Code Output UPC-ANumber System 4 Addenda Required UPC-ANumber System 5 Addenda Required Require Coupon Code/Addenda: Require Coupon Code or 5 Digit Require Coupon Code, 2 Digit Addenda, or 5 Digit Addenda Coupon GS1 DataBar Output GS1 Output On * GS1 Output Off <Default All UPC-ESettings UPC-E0Number System and Check Digit UPC-E0Addenda Required UPC-E0Addenda Separator UPC-E0Check Digit UPC-E0Leading Zero UPC-E0Addenda UPC-E0Redundancy <Default All EAN/JAN Settings EAN/JAN-13Addenda EAN/JAN-13Addenda Required EAN-13Beginning with 2 Addenda Required Require 2 Digit Addenda: Don’t Require 2 Digit Addenda: EAN-13Beginning with 290 Addenda Required Require 5 Digit Addenda: Don’t Require 5 Digit Addenda: Don’t Require 5 Digit Addenda *Don’t Require 5 Digit Addenda EAN-13Beginning with 414/419 Addenda Required EAN-13Beginning with 434/439 Addenda Required EAN-13Beginning with 977 Addenda Required EAN-13Beginning with 978 Addenda Required EAN-13Beginning with 979 Addenda Required EAN/JAN-13Addenda Separator EAN/JAN-13Redundancy EAN/JAN-13 ISBN Translate Convert ISBN to 13-Digit Convert to ISBN Reformat Reformat On *Reformat Off ISSN Translate ISSN Reformat <Default All EAN/JAN-8Settings EAN/JAN-8Addenda Required EAN/JAN-8Addenda Separator <Default All MSI Settings MSI Redundancy MSI Redundancy MSI Message Length < Default All Plessey Code Settings < Default All GS1 DataBar Omnidirectional Settings < Default All GS1 DataBar Limited Settings < Default All GS1 DataBar Expanded Settings Trioptic Code Redundancy Trioptic Code Redundancy Emulation GS1 DataBar Emulation GS1 Code Expansion Off <Default All China Post (Hong Kong 2 of 5) Settings China Post (Hong Kong 2 of 5) Message Length Utilities List Apps * Decoding Apps On Decoding Apps Off * Formatting Apps On EZConfig-ScanningOperations Scan Data Configure Installing EZConfig-Scanningfrom the Web Resources Software Select Product Number Page Serial Programming Commands Data Field Usage Concatenation of Multiple Commands Responses ACK ENQ Read Time-Out Read Time-Out Read Time-Out Product Default Settings Programming the Interface Input/Output Selections Page Page Page Prefix/Suffix Selections Data Formatter Selections Symbologies Page Page Page Page Page Page Page Page Utilities Serial Programming Commands Page Product Specifications Typical Performance Focus Near Distance Far Distance Paper Page Serial Output Maintenance Replacing an Interface Cable Is the power on? Is the aimer on Is the scanner having trouble reading your symbols Is the bar code displayed but not entered Does the scanner read the bar code incorrectly Customer Support Page Reference Charts Possible modifiers Postal Symbologies Printable Characters Printable Characters (Continued) Extended ASCII Characters ASCII Alternate Extended PS2 Scan Code Extended ASCII Characters (Continued) Page Code Page Selection Method/Country Standard Keyboard Country Honeywell Code Page Option ISO / IEC 646 National Character Replacements 104 Key U.S. Style Keyboard 105 Key European Style Keyboard Page Page Page Page Honeywell Scanning & Mobility