Honeywell 1280i Partial Sequence, Require Output Sequence, *Off, Required, Required, On/Not Required, On/Not Required, Discard Partial Sequence, Transmit Partial Sequence

* Sequence Match Beeper OnPartial Sequence

If an output sequence operation is terminated before all your output sequence criteria are met, the bar code data acquired to that point is a “partial sequence.”

Scan Discard Partial Sequence to discard partial sequences when the output sequence operation is terminated before completion. Scan Transmit Partial Sequence to transmit partial sequences. (Any fields in the sequence where no data

match occurred will be skipped in the output.)

Transmit Partial Sequence

* Discard Partial SequenceRequire Output Sequence

When an output sequence is Required, all output data must conform to an edited sequence or the scanner will not transmit the output data to the host device. When it’s On/Not Required, the scanner will attempt to get the output data to conform to an edited sequence but, if it cannot, the scanner transmits all output data to the host device as is.

When the output sequence is Off, the bar code data is output to the host as the scanner decodes it. Default = Off.

Note: This selection is unavailable when the Multiple Symbols Selection is turned on.

RequiredOn/Not Required*Off

3 - 19