Honeywell 51-52-25-131 user manual Install/Upgrade Procedure, Select Version

Installation

2.2 Install/Upgrade Procedure

Follow this procedure to install, reinstall, or upgrade P.I.E.

ATTENTION: If upgrading, any P.I.E. databases (that is, saved instrument configurations) can be copied to the new P.I.E. application directory. Older databases are compatible with newer versions of P.I.E.

Step	Action
1	If upgrading PocketPC, perform section 2.3 Uninstall Procedure before continuing.
	Insert P.I.E. CD into your PC. Click “Install/Uninstall” from the opening menu.
2	Welcome Screen starts off the installation.
3	License agreement details the agreement on which you purchased this software. Continue only
	after reading and agreeing to these terms.
4	Select Platform
	Select the platform on which to install P.I.E.: PC, Pocket PC, or Both.
5	Select Version
	This screen appears only if P.I.E. is already installed. Use this screen to reinstall or upgrade your
	software. If no version is already installed then this screen does not appear; go to Step 6.
	To reinstall:
	The upper frame shows the version of the software that can be installed; click Install to reinstall
	the version specified.
	To upgrade:
	The lower frame shows the versions and their languages that are installed. Select a
	version/languages to be upgraded with the version in the upper frame, then select Upgrade.
	Attention: Any P.I.E. databases (that is, saved instrument configurations)
	can be copied. Older databases are compatible with newer versions of
	P.I.E.
6	PC installation:
	Enter User Name, Serial Number, and License Key
	Enter user name. Enter serial number and license key from the CD cover. Note: numbers
	are case-sensitive.
	Pocket PC installation:
	Microsoft Active Sync application must be installed on the PC and Pocket PC.
	Connect the Pocket PC to the PC with an Active Sync Cable.
	Power up Pocket PC.
	On PC select the Active Sync “Guest Partnership” type connection.
	Enter User Name, Serial Number, and License Key
	Enter user name. Enter serial number and license key from the CD cover. Note:
	characters are case-sensitive.

4 Process Instrument Explorer Configuration Software User Manual 03/06