Honeywell HCM-6009 owner manual A D V A N C E D M I S T H U M I D I S T A T, S T E P 1 : P O W E R

Models: HCM-6009

1 48
Download 48 pages 15.19 Kb
Page 6
Image 6
A D V A N C E D M I S T ™ H U M I D I S T A T

QuietCare_Console_OM_Rev1.qx 8/25/06 1:32 PM Page 6

Manual Control Operation (Models HCM-6009, HCM-6011i, HCM-6011WW) (Continued)

A D V A N C E D M I S T H U M I D I S T A T

The Advanced MistHumidistat allows you to adjust and select the humidity level to your personal preference. Your humidifier will turn on and off throughout the day and night to maintain the desired humidity level you have selected.

H O W T O S E T T H E H U M I D I S T A T

First, turn the humidifier on and select your output/speed level. Set the Advanced MistHumidistat on High by turning the knob

clockwise H O W T O S E T T H E H U M I D I S T A T to the end (Fig. 5).

Let the humidifier run on high for a least one hour or until your room has reached a comfortable humidity level.

Fig. 6

Desired

Humidity Light

(Illuminated)

Power Light (Illuminated)

Ionizer

Button

At this point, slowly turn your Humidistat knob counter-clockwise EasySet™ Control Operation (Model HCM-6013i) until the humidifier shuts off and the Desired Humidity light illuminates (Fig. 6).

Now that your Humidistat knob is set, the humidifier will automatically turn back on when your room drops below your comfort setting and will automatically turn off again when the setting is reached.

NOTE: If the humidifier fan will not start or restart when you select a fan speed, the Advanced Mist

Humidistat may be set too low. Turn the dial clockwise S T E P 1 : P O W E R to the end (Fig. 5). The Desired Humidity light will turn Off when the unit is producing moisture. When the Desired Humidity light turns ON, you have reached optimal humidity.

I O N I Z E R F E A T U R E (HCM-6011i & HCM-6011WW Only)

The ionizer helps freshen the air.

Press the Ionizer button once to start; the Ionizer light will illuminate. Note: The unit must be turned on for the Ionizer to function.

To turn off the ionizer, simply press the ionizer button again; the ionizer light will turn off.

NOTE: The ionizer automatically turns off when the desired humidity is reached (your desired humidity light will be illuminated, see Fig. 6). It will turn back on again when your humidifier restarts.

EasySetControl Operation (Model HCM-6013i)

P O W E R

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN ELECTRICAL SHOCK COULD OCCUR.

Fig. 7

Humidistat

Ionizer

With the power OFF, plug the filled humidifier into a polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.

Control

Button

S T E P 1 : P O W E R

Press the Power button to start the humidifier. Your humidifier will automatically start on High power, Continuous Mode (Fig. 7).

To turn your humidifier OFF simply press the Power button again.

Fan Speed

PowerControl

Button

6

Page 6
Image 6
Honeywell HCM-6009 A D V A N C E D M I S T H U M I D I S T A T, H O W T O S E T T H E H U M I D I S T A T, P O W E R