QuietCare_Console_OM_Rev1.qx 8/25/06 1:32 PM Page 9
Digital EasySet™ Control Operation (Model
the display will revert to showing the current room humidity. If you set a timer but no longer wish to have it set, turn the unit off and then repeat steps 1 and 2.
S T E P 4 : S E T H U M I D I T Y
•You can set your desired humidity in 1% increments anywhere from 25% to 65%.
•To set your desired humidity, press the humidity button ( 
) up or down (Fig. 13).
•When the display indicates your desired humidity setting wait 3 seconds.
•After 3 seconds your desired humidity is set and the display will revert back to showing the current room humidity.
NOTE: If you wish to change your humidity setting or check to see | Fig. 13 |
what you set, simply press the humidity button once and it will |
|
show you the set humidity. If you want to change it, continue to |
|
push the button up or down until you have reached your new |
|
desired humidity. Again, after 3 seconds the display will revert to |
|
showing the current room humidity. |
|
• Once you have set your humidity the unit will operate under this |
|
setting until the unit is turned off or your selected humidity is |
|
reached. |
|
•When your desired room humidity has been reached the fan will
shut off and the house icon ( 
) on the top of your display will
illuminate (Fig. 14). It will stay illuminated until your desired |
| |
Fig. 14 | ||
humidity decreases at which time the fan will turn back on. | ||
|
NOTE: Your room humidity can often fluctuate. It is normal for your unit to turn itself on and off throughout the day as it is monitoring your changing environment.
To go back to continuous mode, turn your unit off and then back on and select your desired output setting (see step 2).
I O N I Z E R F E A T U R E
The ionizer helps freshen the air.
•Press the Ionizer button once to start; the Ionizer light will illuminate. Note: The unit must be turned on for the Ionizer to function.
•To turn off the ionizer, simply press the ionizer button again; the ionizer light will turn off.
NOTE: The ionizer automatically turns off when the desired humidity is reached (your desired humidity light will be illuminated, see Fig. 7). It will turn back on again when your humidifier restarts.
9
