Installation

Use the to change the values, then click OK to save the settings.

Note Some settings such as AUTO FOCUS might not be compatible with your particular PTZ equipment. If this is the case, then changing the value will not have an effect on the PTZ control.

Configuring PTZ Presets in Live View

Configure PTZ presets for a preset tour. See Configuring a PTZ Tour on page 39.

1. Navigate to PTZ in the Control bar, then click to select. The PTZ window appears.

Figure 2-20 PTZ Window

Select the camera channel

2.Select the camera by channel.

3.Select a preset number.

4.Use the arrow buttons to reposition the PTZ camera field of view.

5.Use ZOOM, FOCUS, and IRIS to change the current camera view.

6.Click PARAMETER to configure PTZ camera parameters.

7.Click SET to save the settings.

See Table 2-1on page 23 for descriptions of front panel and remote controller controls for PTZ cameras.

Configuring PTZ Camera Parameters

Click PARAMETER in the PTZ camera window, and the PTZ Parameter window appears.

38