Honeywell HREP16, HREP4, HREP8 Configuring Panic Recording, Note, CANCEL, PANIC RECORDING, Figure 2-65PANIC RECORDING Setup Window

Installation

Note Alarm-activated recording can be used in conjunction with Continuous/Motion Recording. For example, you can configure your DVR to record continuously at a low frame rate (set in Continuous/Motion Recording), and then to increase to a higher frame rate during an alarm input (set in

ALARM SETUP).

Configuring Panic Recording

Click PANIC RECORDING on the left side of the RECORDING setup window.

The PANIC RECORDING Setup window opens.

Figure 2-65 PANIC RECORDING Setup Window

During Panic Recording, the DVR overrides all other recording settings and uses the settings configured here to record continuously on all channels.

Press to enable configuration of SIZE, FPS, QUALITY, and AUDIO for each channel during Panic Recording. A new configuration window opens. Use the cursor keys to navigate to the configurable fields. Press to enable the configurable field for configuration. Press to save a setting. Press to delete a setting and to escape to a different configurable field.

Navigate to OK and press to save the settings. Navigate to CANCEL and press or press to escape from this window.

70