Installation

Configuring Event/Sensor Settings

Select EVENT/SENSOR in the Main system setup window, then click . The

EVENT/SENSOR setup window opens.

Figure 2-51 EVENT/SENSOR Setup Window

Configuring for HDD Events

1.Click HDD EVENT on the left side of the EVENT/SENSOR window if it is not already selected.

The HDD EVENT setup menu appears. See Figure 2-51.

2.Configure the DVR to monitor the hard drives and detect problems:

S.M.A.R.T. HDD ALARM

Enables S.M.A.R.T. disk monitoring.

 

 

CHECK INTERVAL

Adjust the interval as desired.

 

 

DISK FULL EVENT

Select ON/OFF to enable/disable.

 

 

Configuring Alarm Input

1.Click ALARM INPUT on the left side of the EVENT/SENSOR window. The ALARM INPUT setup menu appears.

58