Installation
The SYSTEM INFORMATION Window displays the following information:
| F/W Version | Shows the firmware version of the DVR. |
|
|
| H/W Version | Shows the hardware version of the DVR. |
|
|
| Video Signal Type | PAL or NTSC according to the DIP switch setting on the |
| |
|
|
| Disk Capacity | The first value shows the amount of hard drive capacity |
| used by recorded footage. The second value shows the |
| total hard drive capacity installed. |
|
|
| IP Address | Shows either the manual IP address entered in |
| NETWORK setup or the IP address assigned by a DHCP |
| server, if enabled. |
|
|
| MAC Address | Shows the MAC (Media Access Control) address of the |
| DVR. |
| It is unique - no other network device has this MAC |
| address. |
|
|
| DDNS DOMAIN NAME | If DDNS is enabled, the host DDNS server is specified |
| here. |
|
|
| RTSP SERVICE PORT | The port number that the DVR uses to support remote |
| connection from the client software. |
|
|
| WEB SERVER PORT | The port number that the DVR uses to support remote |
| connection from Internet Explorer or other web browsers. |
|
|
| SYSTEM NAME | It is used so that notification |
|
|
| F/W UPGRADE | Firmware updates might be released periodically to |
| enhance system performance and add extra features. |
| You can upgrade the firmware using a USB memory stick. |
|
|
Upgrading the Firmware
1.Download the firmware upgrade onto a USB memory stick or burn it to a CD/DVD.
2.Insert the USB memory stick or the CD/DVD into the DVR.
3.Click UPGRADE.
The Firmware Upgrade window appears.
Figure50