Honeywell HREP16, HREP4, HREP8 Activating a Sequence, Modifying a Sequence, ADD, ADD, SEQ, List, CLOSE, CONFIRM, Figure 2-29Sequence Window, Figure 2-30SEQUENCE SETUP Window

Installation

Figure 2-29 Sequence Window

5.Click ADD. The SEQUENCE SETUP window appears.

Figure 2-30 SEQUENCE SETUP Window

6.Select a screen display layout from the VIEW TYPE, select the channels for the layout from the CONFIGURE panel, then click CONFIRM.

Click ADD to add another mode.

Double-click the current sequence to modify it. The SEQUENCE SETUP window reappears.

Click CLOSE when you are finished.

Activating a Sequence

Press SEQ on the front panel or select Sequence	from the control bar when in live
view. See Figure 2-8on page 30.

Modifying a Sequence

1.Double-click in the List column the sequence you want to modify. The EDIT window appears.

44