Honeywell HREP16, HREP4, HREP8 Configuring Alarm Setup, Color Codes for the Schedule Screen, SIZE/FPS/QUALITY and SCHEDULE Configuration Fields, Note, Table, SCHEDULE, Block Color

HREP Color Digital Video Recorder User Guide

Figure 2-64 EVENT Window

5.Select the type of event recording (NONE, CONTINUOUS, MOTION, CONTINUOUS/MOTION), then click OK. The EVENT window closes.

Color Codes for the Schedule Screen

The schedule screen uses four differently colored blocks to indicate the different recording modes.

Table 2-5	Color Codes for the Recording Modes
Block Color	Recording Mode
PINK	No scheduled or motion recording.
SKY BLUE	Continuous recording.
BLUE	Recording triggered by motion detection.
YELLOW	Continuous recording and recording triggered by motion
	detection.

Configuring Alarm Setup

Click ALARM RECORDING on the left side of the RECORDING setup window.

The ALARM RECORDING Setup window opens.

Configure ALARM RECORDING in the same way you configure CONTINUOUS/MOTION RECORDING. See Configuring Continuous/Motion Recording on page 65 for more information.

SIZE/FPS/QUALITY and SCHEDULE Configuration Fields

SIZE/FPS/QUALITY	Recording settings for each channel can be defined across
	a 24-hour period, in blocks (for example between 09:00
	and 18:00), or for each individual hour.
	Note When SCHEDULE MODE is set to WEEKLY, each
	day of the week can also be selected.
SCHEDULE	Use this tab to configure at what times the DVR records
	and whether it records continuously or as a result of
	motion detection.

Document 800-06847 Rev B	69
08/10