Security and Alarm Functions
Deactivating the Emergency Alarm
1.Enter the password.
2.To turn off the warning sound, press the stop button.
3.To deactivate the alarm completely, press the return button.
You need to finish your call or monitoring first to deactivate the alarm while talking on the phone or monitoring the entrance.
Caution If the gas leak or cause of fire is not removed completely, the alarm is activated again.
Caution In case of gas leak, close the gas valve, open the windows to allow ventilation, and wait until the sensor lamp turns green. Do not turn on any electrical device.
You can perform deactivating and resetting by pressing stop and return even while the gas or fire alarm is activated (according to the laws and regulations on fire prevention).
Testing the Alarm Sound
1.Press the button.
2.Press.
3.Press for emergency, for fire, for gas, or for intrusion.
4.The lamp then blinks, and the corresponding alarm sounds (in case of emergency, however, only the lamp blinks).
5.To turn off the warning sound, press stop .
6.To terminate the test, press return .
16 / Honeywell Co., Ltd.