Saving Image Function
To Modify Time
| 1 Press | [Door] + to go to SET UP MODE in |
| Time Modify. | |
| 2 Press | to remove the cursor to the modify |
| position. |
|
| 3 Press | to increase the value, press to |
| decrease the value. After the time check, press to | |
| remove the cursor to the position to modify. | |
2009.04.06 | 10:00:30 |
|
| 4 To exit fromTime Setup Mode , press . |
To Record the image of the visitor
1 When the visitor is calling at entrance or pressing the
entrance monitor, press to start recording.
2 When Away Mode is set but the visitor calls at entrance, it will record automatically.
The recorded image is in color style. When the amount of the images is over 50 pieces, the 51st one
2009.04.06 10:00:30would cover the first one, the 52nd one would cover the second one, so does the following one.
To Check the image | To Delete the image | ||
1 Press | [Door] + to display the | 1 Press | [Door] + to display the |
recorded image. | recorded image. | ||
2 Press | to display the next menu. | 2 Press | to delete the all saved |
|
| images. |
|
2009.04.06 | 10:00:30 | 2009.04.06 | 10:00:30 |
|
|
18 / Honeywell Co., Ltd.