Changing the Wake Area Sensitivity Level (Photocell LED Range Adjust)
The MS2400 Series bar code scanner wake area sensitivity level can be set to the end users preference by scanning one of the Photocell Sensitivity adjustment bar codes below.
*Max Photocell
Sensitivity
This feature enables the MS24xx to be at max sensitivity or far sensing for the wake up photo transistor.
³ 2 2 1 2 0 0 * This is the default setting.
Medium Photocell
Sensitivity
This feature enables the MS24xx to be at a medium 1 sensitivity or medium sensing for the wake up photo transistor.
³ 2 2 1 2 1 0
Low Photocell
Sensitivity
This feature enables the MS24xx to be at a low sensitivity or low sensing for the wake up photo transistor.
³ 2 2 1 2 2 0
Min Photocell
Sensitivity
This feature enables the MS24xx to be at the lowest sensitivity (close only) for the wake up photo transistor.
³ 2 2 1 2 3 0
*MS2400 Series Bar Code Scanner Default Setting
32