Diagnostic Indicator Display

 

Error

 

Description

 

Code

 

 

 

 

LASER #2 (RIGHT HORIZONTAL) HIGH CURRENT WARNING – The laser in the vertical

25scanning subsystem is drawing excessive current. This could be a warning for a future total failure. Have the unit checked at an authorized service center when convenient.

LASER #3 (LEFT HORIZONTAL) HIGH CURRENT WARNING – The laser in the vertical

26scanning subsystem is drawing excessive current. This could be a warning for a future total failure. Have the unit checked at an authorized service center when convenient.

LASER #1 (VERTICAL) UDNERCURRENT WARNING – The laser in the vertical scanning

27subsystem is drawing too little current. The laser is probably not on. This could be the result of a loss of the required set point in memory. Have the unit checked at an authorized service center.

LASER #2 (RIGHT HORIZONTAL) UNDERCURRENT WARNING – The laser in the right

28horizontal scanning subsystem is drawing too little current. The laser is probably not on. This could be the result of a loss of the required set point in memory. Have the unit checked at an authorized service center.

LASER #3 (LEFT HORIZONTAL) UNDERCURRENT WARNING – The laser in the left vertical

29scanning subsystem is drawing too little current. The laser is probably not on. This could be the result of a loss of the required set point in memory. Have the unit checked at an authorized service center.

MOTOR #1 (VERTICAL) ERROR – The motor in the vertical scanning subsystem denotes a

31failure. The scanner will try three times to correct the motor operation. If the motor error persists, the vertical scanning subsystem will be shut down and this error code will remain on the Diagnostic Indicators.

MOTOR #2 (HORIZONTAL) ERROR – The motor in the horizontal scanning subsystem denotes

32a failure. The scanner will try three times to correct the motor operation. If the motor error persists, the horizontal scanning subsystem will be shut down and this error code will remain on the Diagnostic Indicators.

34MOTOR #1 (VERTICAL) SPEED ERROR – The motor in the vertical section cannot be speed controlled as desired. Have the unit checked at an authorized service center.

35MOTOR #2 (HORIZONTAL) SPEED ERROR – The motor in the horizontal section cannot be speed controlled as desired. Have the unit checked at an authorized service center.

38