Honeywell ST 3000 transmitter. Table 13 Process Connections

40 ST 3000 Release 300 and SFC Model STS103 User’s Manual 6/08
Continued on next page
4.3 Piping ST 3000 Transmitter, Continued
ATTENTION Care must be taken when installing transmitters on hot processes. The
operating temperature limits for the device (as outlined in Table 5) must
not be exceeded. Impulse piping may be used to reduce the temperature
of the process that comes into contact with the transmitter meter body.
As a general rule there is a 56 degree C drop (100 degree F) in the
temperature of the process for every foot of ½ inch uninsulated piping.
Process connections Table 13 describes typical process connections for a given type of
transmitter.
Table 13 Process Connections
Transmitter Type Process Connection
Differential
Pressure • Process heads with 1/4-inch NPT female connection.
• Flange adapters and manifolds with 1/2-inch female
connection are optional.
• Models with pseudo flange on one side include 2- or 3-
inch ANSI class 150 flange.
Gauge Pressure • Process head with 1/2-inch NPT female connection
(Series 100).
• In-line 1/2-inch NPT female connection (STGxxL).
• In-line ½ inch NPT male
• 9/16 AMINCO
• DIN 19213
• Process heads with 1/4-inch NPT female connection
(STG9x4).
• Flange adapters and manifolds with 1/2-inch female
connections are optional (STG9x4).
• 2-inch Sanitary Tri-Clamp (STGxxT)
• Flush mount in 1-inch weld sleeve, with O-ring and
locking bolt (STGxxP).
Absolute Pressure • Process head with 1/2-inch NPT female connection.
(STAx22, x40).
• In-line ½ inch NPT male
• 9/16 AMINCO
• DIN 19213
Flange Mounted
Liquid Level • Small flange 1/2-inch, 1-, 1 ½ - and 2-inch (STFxxT)
• 2, 3- or 4-inch flange with flush or 2-, 4- or 6-inch
extended diaphragm (See Table 14) on high pressure
side.*
• DN 50, 80, or 100 PN 40 flange with flush or 2, 4 or 6
inch extended diaphragm (See Table 14) on High
Pressure Side*.
Remote
Diaphragm Seals See Model Selection Guide for description of available
Flanged, Threaded, Chemical Tee, Saddle, and Sanitary
process connections.
* Reference side has standard differential pressure process head.
Continued on next page