ACCESSING SUNRISE/SUNSET WINDOW
Press UP or DOWN until the sunrise and sunset icons on the lower left of the display will start flashing.
PROGRAMMING YOUR LOCATION
•In Sunrise/Sunset Window, press and hold SET until the city code in the Time Window will flash entering the location programming mode.
•Select the city code closest to your area by pressing the UP or DOWN. Refer to P. for a list of available codes. The corresponding longitude and latitude will be displayed in Sunrise/Sunset Window along with the city code.
•If you wish to enter the geographical coordinates yourself, select the “USR” (user) as a city code.
•Press SET to confirm your selection and enter into the geographical coordinates programming mode – the latitude degrees will flash
PROGRAMMING LATITUDE, LONGITUDE, TIME ZONE AND DST
•Press UP or DOWN to adjust the digits. Press and hold either button for fast advance.
•Press SET to confirm your selection.
•Repeat above procedure to set latitude and longitude minutes, longitude degrees, time zone, and DST selection.
•Once programming is completed, the display will return to the Sunrise/Sunset Window.
VIEWING LOCATION DATA
In Sunrise/Sunset Window press SET selecting either:
•Time and sunrise/sunset times
•Calendar and sunrise/sunset times
•Calendar and longitude/latitude
VIEWING SUNRISE/SUNSET TIMES FOR DIFFERENT DATES
•In Sunrise/Sunset Window, press MEMORY until the date in the Time Window will flash
•Press UP or DOWN selecting the desired date. Press and hold either button for fast digits advance
•The corresponding sunrise and sunset times will be displayed for the selected date
•Press MEMORY or SET to return display to the Sunrise/Sunset Window
37
UNDERSTANDING OF SUNRISE/SUNSET INFORMATION
The sunrise time displayed in the morning will be different from the one displayed in the afternoon/night:
For the period from 12 am to 12 pm the unit will display the sunrise time for a current day For the period from 12 pm to 12am the unit will display a sunrise time for the next day with the “NEXT DAY” icon
At some locations, especially with high latitudes, sunrise and sunset events may not occur within 24 hours.
Display | Sunrise status | Display | Sunset status |
FULL | Sunrise for the | FULL | Sunset on the |
| previous day |
| following day or |
|
|
| later |
- - - - | No sunrise for the | - - - - | No sunset for |
| whole day |
| the whole day |
TEMPERATURE AND HUMIDITY WINDOW
The Weather Station supports up to 5 remote thermo hygrometers, corresponding to a separate channel of the temperature and relative humidity display. The temperature can be displayed in Celsius (ºC) or Fahrenheit (ºF).
The main unit carries the temperature and humidity sensor and uses this data to calculate an indoors comfort level - Wet, Comfort or Dry.
A temperature alert function is available for each channel. It can be programmed to sound if the channel temperature exceeds or falls below the
Note: The temperature alarms have a 0.5 ºC deviation to prevent them from sounding due to small temperature fluctuations that are close to the set alarm value. This means that after the temperature reaches the alarm temperature, it will have to fall below the alarm temperature plus the deviation (0.5°C) to activate the alarm.
COMFORT LEVEL INDICATION
The main unit is capable of detecting and displaying the current indoor comfort levels of surrounding environment. The comfort level based on the combination of the current indoor temperature and humidity readings. The following comfort levels may be displayed: COMFORT (comfortable); WET (wet) and DRY (dry).
38