Wind Vane, Wind Cups | Honeywell TN924W manual

C. Rain gauge bucket feet

Allows securing the rain gauge on its place

•Make sure that the rain gauge bucket is level – check if the ball bearing inside the bucket is at the midpoint of the leveler.

•Place the protective screen over the top to protect the rain gauge from the debris.

•Mount the rain gauge in place using mounting hardware provided.

•Make sure that the rain gauge is in open area where precipitation falls directly into the gauge’s bucket, ideally 2-3 feet above the ground.

D. Funnel-shaped top with battery compartment

Contains battery compartment and rainfall counting electronics E. Battery compartment

Holds two AA-size batteries F. Screws

Secure battery compartment cover G. Built-in leveler

Allows leveling rain gauge on the surface H. Bucket see-saw mechanism

Collects the rainfall in one of its containers and self-empties once full I. Protective screen

Protects the rain gauge funnel from debris

BATTERY INSTALLATION

•Unlock the funnel-shaped top on the rain gauge by turning both knobs on the sides in an anti-clockwise direction.

•Remove the funnel-shaped top lifting it off the rain gauge bucket.

•Remove 7 small screws from the battery compartment cover using a small Phillips screwdriver

•Insert 2 “AA” size alkaline batteries (not included), matching the polarities as shown in the battery compartment.

•Replace the battery compartment door and secure the screws.

•Insert the funnel-shaped top into the rain gauge bucket and secure it into place by turning the knobs clockwise.

MOUNTING

PLACEMENT

•The rain gauge should be placed in an open area away from the walls, fences, trees and other coverings which may reduce the amount of rain falling into the bucket. Additionally, trees and rooftops may be sources of pollen and debris.

•To avoid the rain shadow effects, place the rain gauge horizontally, on the distance corresponding to two to four times the height of any nearby obstruction.

•It is important that excess rain can flow freely away from the rain gauge.

OPERATION

After batteries are correctly installed, the rain gauge will start transmitting a rainfall data to the main unit.

ANEMOMETER

FEATURES

•Wind speed , wind gust and wind direction measurement

•Measurement of the temperature at the place of anemometer

•Remote transmission of the temperature, wind speed , gust and wind direction data to the main unit via 433 MHz signal

•Operating range of up to 100 feet (30 meters)

•Wall or pole mount

A. WIND VANE

Measures wind direction

B. WIND CUPS

TN924W specifications

The Honeywell TN924W is a state-of-the-art wireless thermostat designed to optimize home heating and cooling systems while ensuring energy efficiency and user convenience. This smart thermostat combines advanced technology with a user-friendly interface, making it an ideal choice for homeowners seeking to enhance their comfort while reducing energy consumption.

One of the main features of the TN924W is its Wi-Fi connectivity, allowing users to control their home temperature remotely through a smartphone app. The Honeywell Home app provides an intuitive platform for users to adjust heating and cooling schedules, monitor energy usage, and receive alerts, all from the convenience of their mobile devices. This capability not only increases comfort but also helps homeowners save on energy bills by enabling better management of heating and cooling patterns.

Another significant aspect of the TN924W is its compatibility with a wide range of heating and cooling systems. Whether it's a traditional HVAC setup, a heat pump, or a non-programmable system, the TN924W integrates seamlessly to deliver precise temperature control. This versatility ensures that users can enjoy the benefits of smart technology regardless of their existing system.

The TN924W also boasts a user-friendly touchscreen interface that simplifies programming and adjustments. With its clear display, users can easily navigate through the settings and customize their heating and cooling schedules. The thermostat supports multi-stage systems, allowing for more refined temperature management, which is particularly beneficial in larger homes or spaces with varying temperature needs.

In terms of energy-saving technology, the TN924W features Honeywell's Smart Response Technology. This innovative system anticipates heating and cooling needs based on various factors, such as current temperature, the time of day, and user habits, ensuring that the home is at the desired temperature when needed. Moreover, the thermostat can provide energy usage reports, empowering users with insights into their consumption patterns and opportunities for additional savings.

Overall, the Honeywell TN924W stands out as a leading choice for homeowners who prioritize comfort, convenience, and energy efficiency. Its advanced features, compatibility with diverse systems, and ease of use make it a valuable addition to any smart home.

Honeywell TN924W user manual Wind Vane, Wind Cups

Models: TN924W