Assembly

Measures wind speed

C. ANEMOMETER BASE

•Holds battery compartment

•Allows mounting the anemometer vertically

D. ANEMOMETER ARM

Keeps anemometer assembly together

BATTERY INSTALLATION and ALIGNING

• Remove four (4) screws from the battery compartment with a small Phillips

screwdriver

• Open the battery compartment and install 2 “AA” size alkaline batteries (not

included) matching the polarities shown

• Point the wind vane (A) to the north (use a compass or map if necessary). The

default direction is NORTH when the wind direction vane (A) is in parallel with

an anemometer arm (D)

• Watch that the main display unit in the Wind Window displays the wind

direction arrow pointing to the NORTH

• If the wind direction arrow in the Wind Window does not show NORTH, press

E. WIND CUPS SHAFT

Holds wind cups on the anemometer arm

F. BATTERY COMPARTMENT

Holds 2 AA-size batteries

G. SET OPENING

Allows toggling wind direction between factory pre-set and default set (North)

H. WALL MOUNT SCREW OPENINGS Allow securing the anemometer in place

I. BATTERY COVER

Allows securing 2 AA size batteries on the anemometer base

•Place the wind cups (B) over the wind cups shaft (E) of the anemometer arm (D)

•Insert the wrench tool provided into the wind cups opening

•Loosen the small screw inside and tighten it

•Test if the wind cups (B) sit secure on the wind cups shaft (E)

	SET opening (F) located inside battery compartment with a paper clip or similar
	tool
•	Replace the battery cover (I) and secure the screws

NOTE: Repeat this procedure every time when changing the batteries.

MOUNTING

Mount the anemometer onto a vertical surface, using the fittings provided.

PLACEMENT

•The anemometer should be mounted in an open area with a free air flow; away from the nearby trees, buildings or other structures

•It is suggested mounting anemometer at 33 feet (10meters) above the ground in unobstructed area

MAIN UNIT

Weather Radio receives all NWS alert signals broadcast within approximately 40 miles (65 km) radius.

The Weather Station measures pressure, indoor temperature, humidity and receives atomic time signal from the US Atomic Clock located in Fort Collins, Colorado and all remote weather sensors. It should be placed indoors.

FEATURES

Radio

•NOAA SAME Technology

•Public Alert Certified Device

Weather

•Weather forecast for the next 12 to 24 hour in seven large icons: Sunny, Partly Cloudy, Cloudy, Light Rain, Heavy Rain and Snowy

•Barometric pressure in imperial or metric units

•Altitude adjustment for pressure compensation

TN924W specifications

The Honeywell TN924W is a state-of-the-art wireless thermostat designed to optimize home heating and cooling systems while ensuring energy efficiency and user convenience. This smart thermostat combines advanced technology with a user-friendly interface, making it an ideal choice for homeowners seeking to enhance their comfort while reducing energy consumption.

One of the main features of the TN924W is its Wi-Fi connectivity, allowing users to control their home temperature remotely through a smartphone app. The Honeywell Home app provides an intuitive platform for users to adjust heating and cooling schedules, monitor energy usage, and receive alerts, all from the convenience of their mobile devices. This capability not only increases comfort but also helps homeowners save on energy bills by enabling better management of heating and cooling patterns.

Another significant aspect of the TN924W is its compatibility with a wide range of heating and cooling systems. Whether it's a traditional HVAC setup, a heat pump, or a non-programmable system, the TN924W integrates seamlessly to deliver precise temperature control. This versatility ensures that users can enjoy the benefits of smart technology regardless of their existing system.

The TN924W also boasts a user-friendly touchscreen interface that simplifies programming and adjustments. With its clear display, users can easily navigate through the settings and customize their heating and cooling schedules. The thermostat supports multi-stage systems, allowing for more refined temperature management, which is particularly beneficial in larger homes or spaces with varying temperature needs.

In terms of energy-saving technology, the TN924W features Honeywell's Smart Response Technology. This innovative system anticipates heating and cooling needs based on various factors, such as current temperature, the time of day, and user habits, ensuring that the home is at the desired temperature when needed. Moreover, the thermostat can provide energy usage reports, empowering users with insights into their consumption patterns and opportunities for additional savings.

Overall, the Honeywell TN924W stands out as a leading choice for homeowners who prioritize comfort, convenience, and energy efficiency. Its advanced features, compatibility with diverse systems, and ease of use make it a valuable addition to any smart home.

Honeywell TN924W user manual Assembly

Models: TN924W