Manuals / Honeywell / Portable Media / Portable Radio

Honeywell TN924W user manual Installation, Before YOU Begin

Models: TN924W

1 28
Download 28 pages 4.99 Kb
Page 3
Image 3

INSTALLATION

The Weather Station portion of TN924W operates at 433MHz radio frequency, so no wire installation is required between the main unit (receiver) and the remote weather sensors (transmitters).

The remote weather sensors include a thermo-hygrometer (temperature and humidity) sensor, anemometer (wind sensor) and a rain gauge (rain sensor). All data measured by these remote sensors is transmitted to the main unit wirelessly, with the operating range in the open area from 100 feet (30 meters) for anemometers and rain gauge up to 328 feet (100 meters) for temperature and humidity sensor.

Remote anemometer and a rain gauge must be placed outdoors to measure weather elements.

Remote thermo-hygrometers can be placed indoors or outdoors, depending on the area where the temperature and humidity are intended to be measured. If you intend measuring outdoor temperature and humidity, place the remote sensor outdoors.

NOTE: It is critical to assemble and power up all of the remote weather sensors BEFORE setting up the main unit.

NOTE: It is critical to power up and test communication between all of the weather sensors and the main unit BEFORE permanently mounting them outside.

The Weather Radio segment of TN924W operates at frequency band from 162.400MHz to 162.500MHz and requires AC adapter connected at all times.

BEFORE YOU BEGIN

•ALWAYS install batteries in the remote weather sensors before the main unit

•We recommend using alkaline batteries for the remote weather sensors and the main unit when temperatures are above 32°F (0°C). We recommend using lithium batteries for the remote weather sensors when temperatures are below 32°F (0°C)

•Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power requirements)

•Insert batteries before first use, matching the polarity in the battery compartment

•Remove protective plastic screen from LCD display (if any)

•During an initial setup, place the remote weather sensors close to the main unit

•After reception is established (all of the remote readings will appear on the main unit’s display), position the remote sensors and the main unit within the effective transmission range: 328 feet (100 meters) for temperature/humidity sensor(s) and 100 feet (30 meters for anemometer and rain gauge. Ideally they should be placed within the line of sight of the main unit. See placement tips in the user manual for each remote weather sensor

•Transmission/reception range may be affected by trees, metal structures and electronic appliances, by the surrounding building materials and how the receiver (main unit) and transmitters (weather sensors) are positioned

•The main unit must be placed indoors.

•Place the remote weather sensors so that they face the main unit (receiver), minimizing obstructions such as doors, walls, and furniture.

Note: When the temperature falls below freezing, the batteries in the outdoor remote weather sensors may have reduced voltage supply and a shorter effective range. We recommend using lithium batteries at temperatures of 32°F (0°C) and below.

IMPORTANT: Make sure that remote weather sensors are easily accessible for cleaning and maintenance.

We recommend cleaning the remote weather sensors periodically, as the dirt and debris may affect sensors accuracy.

5

6

Page 2 Page 4
Page 3
Image 3
Honeywell TN924W user manual Installation, Before YOU Begin
Page 2 Page 4

TN924W specifications

The Honeywell TN924W is a state-of-the-art wireless thermostat designed to optimize home heating and cooling systems while ensuring energy efficiency and user convenience. This smart thermostat combines advanced technology with a user-friendly interface, making it an ideal choice for homeowners seeking to enhance their comfort while reducing energy consumption.

One of the main features of the TN924W is its Wi-Fi connectivity, allowing users to control their home temperature remotely through a smartphone app. The Honeywell Home app provides an intuitive platform for users to adjust heating and cooling schedules, monitor energy usage, and receive alerts, all from the convenience of their mobile devices. This capability not only increases comfort but also helps homeowners save on energy bills by enabling better management of heating and cooling patterns.

Another significant aspect of the TN924W is its compatibility with a wide range of heating and cooling systems. Whether it's a traditional HVAC setup, a heat pump, or a non-programmable system, the TN924W integrates seamlessly to deliver precise temperature control. This versatility ensures that users can enjoy the benefits of smart technology regardless of their existing system.

The TN924W also boasts a user-friendly touchscreen interface that simplifies programming and adjustments. With its clear display, users can easily navigate through the settings and customize their heating and cooling schedules. The thermostat supports multi-stage systems, allowing for more refined temperature management, which is particularly beneficial in larger homes or spaces with varying temperature needs.

In terms of energy-saving technology, the TN924W features Honeywell's Smart Response Technology. This innovative system anticipates heating and cooling needs based on various factors, such as current temperature, the time of day, and user habits, ensuring that the home is at the desired temperature when needed. Moreover, the thermostat can provide energy usage reports, empowering users with insights into their consumption patterns and opportunities for additional savings.

Overall, the Honeywell TN924W stands out as a leading choice for homeowners who prioritize comfort, convenience, and energy efficiency. Its advanced features, compatibility with diverse systems, and ease of use make it a valuable addition to any smart home.